Icom A220 TSO Instruction Manual - Page 15

MEMORY OPERATION 3 ■■Basic operation qqPush [RCL] to enter the memory mode. • T he memory channel number is MEMORY 118.00 127.005 CH01 displayed. • T he memory channel name is also displayed if it has been en- tered. wwRotate [O-DIAL] to select the memory channel types. • For the group memory channel, GRP01 118.00 127.005 CH01 push [DIAL] and then rotate [O- DIAL] to select a group. eeRotate [DIAL] to select the de- GRP02 sired channel. 118.00 128.105 CH02 rrPush [RCL] to change standby frequency to the selected fre- 118.00 128.105 quency and exit the memory mode. • For the group memory channel, push [RCL] twice to change the standby frequency to the selected frequency and exit the memory channel. • Hold down [RCL] for two seconds to exit the memory mode with- out changing the previously set standby frequency. ttPush [ ] to exchange to the active frequency. 128.10 118.005 ■■Editing Regular memory/ Group memory channels DDMemory mode menu 03 There are memory mode menus to edit the memory contents. They contain the following items. REPLACE (p. 9) Enter the selected memory channel frequency to the standby frequency. DELETE (p. 9) Deletes the selected memory channel frequency. REVIVE Returns the selected memory channel to its previous state. CH NAME (For only regular memory channel) Sets the channel name to the selected regular memory channel. GRP NAME (For only group memory channel) Sets the group name to the selected memory group. CH TAG (For only group memory channel) Sets the channel tag to the selected memory channel. (Selecting the group memory channel is the only option.) DONE Returns to the memory mode. 8