Icom A220 TSO Instruction Manual - Page 20
Selecting a GPS memory channel, Editing GPS memory, Protecting memory
View all Icom A220 TSO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 MEMORY OPERATION ■■Selecting a GPS memory channel When connected to an external GPS receiver* with an airport frequency database, you can transfer frequency data such as nearby airports to the GPS memory (maximum 10 memory channels). *Ask your dealer for available GPS receiver details. NOTE: Refer to the GPS receiver's instruction manual for transferring the frequency data. qqPush [RCL] to enter the memory mode. wwRotate [O-DIAL] to select "GPS." eeRotate [DIAL] to set a desired GPS memory channel. rrPush [RCL] to exit the memory mode. Airport code GPS RJTJ 122.00 122.055 CH01 TWR Tag name ■■Editing GPS memory The received GPS memory data is stored in the desired group memory channel. NOTE: The GPS memory data is overwritten if the se- lected GPS memory channel already contains other data. qqPush [RCL] to enter the memory mode. wwRotate [O-DIAL] to select "GPS." • "GPS" is displayed. eePush [MEM] to enter the GPS memory channel edit mode, then rotate [O-DIAL] to select a desired group memory. • "GPS" and airport code blink. rrPush [MEM] to store the GPS memory channel data to the selected group memory. ttPush [RCL] to exit the memory mode. ■■Protecting memory The transceiver has memory protection which inhibits the editing (storing, deleting, replacing, and so on) of the regular memory and group memory. Refer to 'Memory Protection' (p. 22) for details. 13