Icom F9011 / F9021 Instruction Manual - Page 20

3 BASIC OPERATION n Clock function The transceiver indicates the current time and date when [Clock] is pushed. And you can change the indication format and time/date settings. When you use the transceiver for the first time, or after the transceiver has sat unused for a long time, make sure to check the date and time indication after turning the power ON. If the time and date are not correct, reset them. (See 'Time and date settings' as at right.) D Time and date indication q Push [Clock] to indicate the current time and date on the LCD. • When the indication format is set to 12-hour, "AM" or "PM" is indicated. • The LCD indication returns to the stand-by mode after 30 sec. has passed with no operation. The time indication format (12-hour/24-hour) 12HR 12:00PM Time YMD 08-04-01 Date MUTE CLOCK ZONE Date indication format (Y: Year, M: Month, D: Day) w Push [Clock] again to return to the stand-by mode. D Time and date settings q P ush [Clock] to indicate the current time and date on the LCD. 12HR 12:00PM YMD 08-04-01 MUTE CLOCK ZONE w P ush and hold [Clock] for 1 sec. to enter the time and date setting mode. • The time indication format, "24HR" or "12HR" blinks. 12HR 12:00PM YMD 08-04-01 MUTE CLOCK ZONE e Push [Clock] to select the desired item to be changed. 15