Icom GM600 User Manual - Page 22
■ Power supply connections, Connecting to the DC power supply through the PS-310
View all Icom GM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6 CONNECTIONS ■■Power supply connections DDConnecting to the DC power supply through the PS-310 You must connect the GM600 to the DC power source through the PS-310 dc-dc power supply, sold by the set with the GM600, when you operate the GM600. The PS-310 converts the input voltage from the DC power supply, then provides 12.6 V DC, 5.5 A of the continuous power to the transceiver. Select the appropriate version for your vessel power system. Screw Flat washer PS-310 • PS-310 Version #01 #02 Input voltage 21.6 ~ 31.2 V DC 10.8 ~ 15.6 V DC Output voltage 12.6 V DC 12.6 V DC Spring washer Mount the PS-310 securely with the 4 supplied screws. GM600 CAUTION: Before connecting the DC power cable, confirm the transceiver is OFF, and the DC power cable polarity is correct. • Red: Positive + terminal • Black: Negative − terminal BE SURE to connect only the DC power cable from the PS-310, and DO NOT extend the cable length. 17 Ferrite EMI filter Tie wrap GND DC power cable DC power cable (S upplied with the PS-310) Battery (12 V or 24 V, depending on the PS-310 version.)