Icom IC-A120 Full Manual - Page 25
Lock Function, Ci-v, Scan, Scan Type, Resume Timer, On-hook Scan, Stop/tx Ch
View all Icom IC-A120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
7 MENU MODE SETTINGS group ■■Functions (Continued) DDCI-V (May not be displayed, depending on the transceiver's presettings.) CI-V address To distinguish equipment, each CI-V transceiver has its own Icom standard address in hexadecimal code. The IC-A120/IC-A120E's default address is 92. When 2 or more transceivers are controlled through a PC at the same time, set a different address for each transceiver. CI-V baud rate Set the CI-V data transfer speed. • 4800 BPS to 19200 BPS: Sets the data transfer speed to between 4800 bps and 19200 bps. • AUTO: The baud rate is automatically set according to the data rate of the controller. CI-V transceive Turn the CI-V Transceive function ON or OFF. • OFF: Turns OFF the function. • ON: When you change a setting on one transceiver, the same setting is automatically changed on other connected transceivers. ■■SCAN DDSCAN TYPE (May not be displayed, depending on the transceiver's presettings.) Select the scan type. When you push [SCAN], the scan proceeds according to this setting. • NORMAL: Push [SCAN] to start a Normal scan. • PRIORITY: Push [SCAN] to start a Priority scan. DDRESUME TIMER (May not be displayed, depending on the transceiver's presettings.) When a received signal disappears, the scan resumes according to this setting. Set the Resume Timer to between 3 seconds and 10 seconds. DDON-HOOK SCAN (May not be displayed, depending on the transceiver's presettings.) Set the On-Hook scan function (p.3-2) to ON or OFF. • OFF: The On-Hook scan function is OFF. • ON: The On-Hook scan function is ON. DDSTOP/TX CH (May not be displayed, depending on the transceiver's presettings.) Select the channel that On-Hook scan stops on when you remove the microphone from the hook, and the channel to transmit on when you push [PTT] in Dualwatch operation. • SCAN CH: The displayed channel is used as the scan stop channel during an On-Hook scan, and as the transmit channel. • PRIORITY CH:The Priority channel is used as the scan stop channel during an On-Hook scan, and as the transmit channel. 7-6