Icom IC-A120 Full Manual - Page 35

9 SPECIFICATIONS AND OPTIONS Specifications (Continued) DDReceiver • Receive system: Double conversion superheterodyne • Intermediate frequencies: 1st 38.85 MHz 2nd 450 kHz • Sensitivity: IC-A120 Less than 1 μV (pd) (at 6 dB S/N) IC-A120E Less than -101 dBm (12 dB SINAD with CCITT) • Squelch sensitivity: IC-A120 Less than 0.35 μV (pd) IC-A120E Less than -116 dBm • Spurious response rejection ratio: IC-A120 More than 5 mV (pd) IC-A120E More than 70 dB • Audio output power: External speaker More than 10 W (at 13.75 V DC with 8 Ω load 60% mod, 10% distortion) Side tone More than 100 mW (at 13.75 V DC with 500 Ω load 60% mod, 10% distortion) All stated specifications are subject to change without notice or obligation. Options HM-217 speaker microphone The speaker microphone with keys and [P1]/[P2] keys. UP/DOWN KEYS Push to select the channel. P1 KEY [P1] Push to select the Priority channel. P2 KEY [P2] Push to turn the Key Lock function ON or OFF. OPC-478UC cloning cable The cable to connect a PC and the OPC-592 cloning cable adapter when you control the transceiver with the CI-V commands (p. 10-2). OPC-592 cloning cable adapter The cable adapter to connect the transceiver and the OPC-478UC cloning cable when you control the transceiver with the CI-V commands (p. 10-2). You can customize the key assignment in the Menu mode (p. 7-5). VS-3 Bluetooth® headset The Bluetooth® headset with a [PTT] switch. UT-133A Bluetooth® unit OPC-871A headset adapter The adapter to connect a standard headset. 9-3