Icom IC-A16 Full Manual - Page 10

5 SCAN OPERATION Using the Scan function zzPush [FUNC], and then push [2]/[SCAN] to start a scan. LLPush [▲] or [▼] to change the scanning direction. LLWhen receiving a signal, the scan pauses and "RX" is displayed until the signal disappears. LLPush [CLR]/[HOME] to stop a scan. Scan types The transceiver has 2 scan functions, as shown below. DDVFO scan Repeatedly scans all frequencies over the COM band. NAV band* 108.000 MHz 118.000 MHz COM band 136.9917 MHz Scan Jump *The USA version transceiver scans NAV band frequencies as well, depending on the presetting. DDMemory channel scan Repeatedly scans tagged memory channels belonging to the same group.* *Skips all untagged memory channels. Mch 1 Mch 2 Mch 3 Untagged channel TAG setting Select whether or not to tag selected channels for scanning. Untagged channels are skipped during a scan. 1. Push [MR]/[MW] to enter the Memory mode. 2. Select a channel to tag or untag. TIP: To change the selected group: 1. Push [FUNC], and then push [3]/[GRP]. 2. Push [▼] or [▲] to select a group, and then push [ENT]/[SET]. 3. Push [FUNC], and then push [9]/[TAG] to tag or untag the selected channel. LL" " is displayed if the channel is tagged. Mch 10 DDWeather channel scan (For only the USA version) Repeatedly scans Weather channels. See page 11 for details. 8