Icom IC-F2000 Operating Guide - Page 15

BASIC OPERATION 2 ■ Emergency Call When pushing [Emergency] for the set time period*, the transceiver transmits an emergency signal once, or repeatedly, on the specified emergency channel. NOTE: 2 Depending on the presetting, the following functions are automatically activated. Ask your dealer for details. The transceiver automatically transmits a repeat emergency signal until it receives an acknowledgement signal, or you turn OFF the transceiver power. When no emergency channel is specified, it transmits the signal on the previously selected channel. If you want to cancel the emergency call, hold down [Emergency] again before transmitting the call. If your transceiver is programmed for Silent operation, you can transmit an Emergency call without the beep sounding and the LED indicator lighting. • Auto TX function After an emergency call transmission, the transceiver transmits the audio from the microphone for a set time period.* • Auto RX function After the emergency call transmission, the transceiver stands by in the audible mode for the set time period.* * Depending on the presetting. Ask your dealer for details. IMPORTANT: It is recommended to set an emergency channel individually to provide the certain emergency call operation. 12