Icom IC-F3031S / F4031S Instruction Manual - Page 10
Programmable function keys
View all Icom IC-F3031S / F4031S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 PANEL DESCRIPTION ■■Programmable function keys The following functions can be assigned to [Emer], [Side1], [Side2], [Side3], [P0], [P1], [P2] and [P3] programmable function keys. Consult your Icom dealer or system operator for details concerning your transceivers programming. If the programmable function names are bracketed in the following explanations, the specific key is used to activate the function depends on the programming. CH UP AND DOWN KEYS ➥ Push to select an operating channel. ➥ Push to select a transmit code channel after pushing [TX Code CH Select]. ➥ Push to select a DTMF channel after pushing [DTMF Au- todial]. ➥ Push to select a scan group after pushing and holding [Scan A Start/Stop]/[Scan B Start/Stop] for 1 second. SIREN KEY Push to emit a siren. ZONE KEY Push this key, then push [CH Up] or [CH Down] to select the desired zone. What is "zone"?- The desired channels are assigned into a zone according to the intended use for grouping. For example, 'Staff A' and 'Staff B' are assigned into a "Business" zone, and 'John' and 'Cindy' are assigned into a "Private" zone. SCAN A KEY ➥ This key's operation depends on the Power ON Scan set- ting. When the power ON scan function is turned OFF; Push to start and cancel scanning operation. In case of transmission during scan, scanning will be cancelled. When the power ON scan function is turned ON; Push to pause scanning, then resumes scanning after passing a specified time period. In case of transmission during scan, scanning will be cancelled. ➥ P ush and hold this key for 1 second to indicate the scan group, then push [CH Up] or [CH Down] to select the desired group. SCAN B KEY ➥ P ush to start and cancel scanning operation. In case of transmission during scan, scanning will be paused. Then resumes scanning after passing a specified time period. ➥ P ush and hold this key for 1 second to indicate the scan group, then push [CH Up] or [CH Down] to select the desired group. PRIO A/B KEYS ➥ P ush to select Priority A or Priority B channel. ➥ P ush and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 second to reassign the operating channel to Priority A or Priority B channel. 5