Icom IC-F3031S / F4031S Instruction Manual - Page 17

User set mode, Emergency Call

Get Icom IC-F3031S / F4031S PDF manuals and user guides View all Icom IC-F3031S / F4031S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

BASIC OPERATION 3 ■■User set mode ■■Emergency Call User set mode is accessed at power ON and allows you to When [Emergency] is pushed for the specified time period*, the set seldom-changed settings. In this case you can "custom- emergency signal is transmitted once, or repeatedly, on the specified 3 ize" the transceiver operation to suit your preferences and emergency channel. operating style. A repeat emergency signal is automatically transmitted until the Entering the user set mode: qqWhile pushing and holding [Side2] and [Side3], rotate [VOL] to turn the power ON. Then, push and hold [P0] for 1 second to enter user set mode. wwPush [P0] several times to select the appropriate item. Then push [CH Up] or [CH Down] to set the desired level/ condition. • Available set mode functions are Backlight, Beep, Beep Level, SQL Level, Mic Gain, Battery Voltage, Signal Moni and Lone Worker. eeRotate [VOL] to turn the power OFF to exit user set mode. transceiver receives an acknowledgement signal, or you turn the transceiver power OFF. When no emergency channel is specified, the signal is transmitted on the previously selected channel. If you want to cancel the emergency call, hold down [Emergency] again before transmitting the call. If your transceiver is programmed for Silent operation, you can transmit an Emergency call without the beep sounding and the LED indicator lighting. IMPORTANT: It is recommended to set an emergency channel individually to provide the certain emergency call operation. NOTE: User set mode is also available via a programma- * Depending on the presetting. Ask your dealer for details. ble function key. Refer to "USER SET MODE KEY." (p. 7) D NOTES Depending on the presetting, the following functions are au- tomatically activated. Ask your dealer for details. • Auto TX function After the emergency call transmission, audio from the microphone is automatically transmitted for a specified time period.* • Auto RX function After the emergency call transmission, the transceiver stands by in the audible mode for the specified time period.* 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
12
3
BASIC OPERATION
3
User set mode
■
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “custom-
ize” the transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q
While pushing and holding [Side2] and [Side3], rotate
[VOL] to turn the power ON. Then, push and hold [P0] for
1 second to enter user set mode.
w
Push [P0] several times to select the appropriate item.
Then push [CH Up] or [CH Down] to set the desired level/
condition.
•
Available set mode functions are
Backlight, Beep, Beep
Level, SQL Level, Mic Gain, Battery Voltage, Signal
Moni and Lone Worker.
Rotate [VOL] to turn the power OFF to exit user set
e
mode.
NOTE:
User set mode is also available via a programma-
ble function key. Refer to “USER SET MODE KEY.” (p. 7)
Emergency Call
■
When [Emergency] is pushed for the specified time period*, the
emergency signal is transmitted once, or repeatedly, on the specified
emergency channel.
A repeat emergency signal is automatically transmitted until the
transceiver receives an acknowledgement signal, or you turn the
transceiver power OFF.
When no emergency channel is specified, the signal is transmitted
on the previously selected channel.
If you want to cancel the emergency call, hold down [Emergency]
again before transmitting the call.
If your transceiver is programmed for Silent operation, you can trans-
mit an Emergency call without the beep sounding and the LED indi-
cator lighting.
IMPORTANT:
It is recommended to set an emergency
channel individually to provide the certain emergency call
operation.
* Depending on the presetting. Ask your dealer for details.
D
NOTES
Depending on the presetting, the following functions are au-
tomatically activated. Ask your dealer for details.
• Auto TX function
After the emergency call transmission, audio from the micro-
phone is automatically transmitted for a specified time period.*
• Auto RX function
After the emergency call transmission, the transceiver stands
by in the audible mode for the specified time period.*