Icom IC-F4161D Operating Guide For Biis/mdc/ltr - Page 31

IDAS OPERATION 5 D Receiving a Message D Receiving a Stun, Kill or Revive 1 q When a Message is received: • Beeps sound. If an individual call with Stun or Kill command is received (RAN code matching is not necessary depending on the pre- 2 • The calling station ID or Talkgroup name (or code) and the mes- setting), the transceiver will display "SORRY" and you cannot 3 sage blink. Blink receive* or transmit. * Depending on the received Stun command setting. 4 The received message MSG 1 5 ➥ When a Stun command is received: • The transceiver cannot be operated until the individual call with 6 The calling station or STATION 1 DIGI STUP STDN Revive command is received (RAN code matching may not be necessary, depending on the presetting) or input a password. 7 Talkgroup ID name ➥ When a Kill command is received: 8 NOTE: When the received message includes more than • The transceiver cannot be operated until the data cloning is per- formed. Ask your dealer for details. 9 12 characters, the message automatically scrolls, when the automatic scroll function is activated. NOTE: Depending on the presetting, the transceiver can 10 • Push [Status Up]/[Status Down] to manually scroll the message. ignore the Stun, Revive and Kill commands, which are 11 from a non-specified station. This function can be used in transceivers whose revision 12 RETURN TO OF FICE number is 2.9 or later. Ask your dealer for details. 13 STATION 1 Scrolls 14 DIGI STUP STDN 15 w P ush [PTT], change the channel, turn power OFF, etc. to 16 stop the display indication. 28