Icom IC-F4161D Operating Guide For Biis/mdc/ltr - Page 5
For Ltr Operation Only, Phone Key, Digital Button Key, Status Up/down Keys, Site Select Key
View all Icom IC-F4161D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PREPARATION 1 1 D For LTR operation only STATUS UP/DOWN KEYS "STUP"/"STDN" 2 PHONE KEY "PHN" ➥ When a received SDM is displayed, push to cancel the 3 Push to connect to or disconnect from the telephone network connection. automatic scroll and manually scroll the message. ➥ When an SDM that contains more than 12 characters is 4 displayed, push to manually scroll the message. 5 D For IDAS operation only DIGITAL BUTTON KEY "DIGI" SITE SELECT KEY "SSEL" 6 ➥ Push to enter the application selection mode. This key allows you to manually select the desired site without 7 ➥ Hold down for 1 second to toggle the call type between Individual and Talkgroup, then automatically enter the appli- roaming scan operation. • This function is usable in transceivers whose revision number is 4.6 8 cation selection mode. or later. Ask your dealer for details. 9 • Push [CH Up] or [CH Down] to select the desired application from "VOICE," "CALALERT," "STUN," "KILL," "REVIVE," "REM NOTE: This key can be used for only Multi-site Trunking 10 MON," "RADIOCHK," "STATUS," "MSG," "STAT POL" and "CALL LOG." mode. 11 ➥ While in the application selection mode, push to enter the q P ush [Site Select] to show the Site Select screen. 12 Individual or Talkgroup ID selection mode. • Push [CH Up] or [CH Down] to select the desired ID name (or w P ush [CH Up] or [CH Down] to select the desired site from the preprogrammed roaming list*. 13 ID code). • If "STATUS" or "MSG" is selected as the application, the message * The valid roaming areas (up to 48) are listed on the roaming list. 14 Ask your dealer for details. selection mode appears. Push [CH Up] or [CH Down] to select e P ush [Site Select] again to set the selected site, and return 15 the desired message, then push again to enter the Individual or Talkgroup ID selection mode. (pp. 39, 40) ➥ While in the application selection mode, hold down for 1 to the stand-by mode. r T he transceiver tries to register to the selected site. 16 second to return to the normal operating mode. 2