Icom IC-F4230D Operation Guide - Page 22

2 IDAS OPERATION ■■ Transmitting a call DD Transmitting a Status Message (Continued) qqPush [Digital Button] to enter the application selection mode. • "VOICE" appears. • To change the call type, hold down [Digital Button] for 1 second while in the standby mode. After changing, the transceiver automatically enters the application selection mode. wwPush [CH Up] or [CH Down] to select "STATUS." For the IC-F3230D/F4230D series transceivers rrPush [CH Up] or [CH Down] to select the desired message. For the IC-F3230D/F4230D series transceivers For the IC-F5220D/F6220D series transceivers For the IC-F5220D/F6220D series transceivers eePush [Digital Button] again to enter the status message selection mode. • The preprogrammed status messages are displayed. Convenient! (10-key version only) Depending on the presetting, you may use the quick status message selection/transmission in the status message selection mode. ➥ Push the numeric key ([1] to [9] or [0]) to select the appropriate status message, programmed in the status list 1 through 10. ➥ Hold down the numeric key ([1] to [9] or [0]) for 1 second to transmit the appropriate status message, programmed in the status list 1 through 10. 20