Icom IC-F4230D Operation Guide - Page 31
■ Roaming function (Multi-site Trunking mode only), ■ Site Lock function (Multi-site Trunking mode
View all Icom IC-F4230D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
IDAS OPERATION 2 ■■Roaming function ■■Site Lock function 1 (Multi-site Trunking mode only) (Multi-site Trunking mode only) 2 The Multi-site Trunking mode allows the transceiver to move The [Site Lock] key allows you to lock the transceiver to the 3 to another site, according to the preprogrammed roaming currently registered site, and the roaming and the background 4 list*, in order to find a site that has a higher quality signal, or scans are inhibited. provides better services. 5 The Roaming function is automatically activated when the transceiver goes out of the range and does not receive the ➥➥Push [Site Lock] to turn the Site Lock function ON or OFF. 6 downlink signal from the repeater in the currently registered site. * Up to 48 valid roaming areas are listed on the roaming list. ■■Site Select function (Multi-site Trunking mode only) 7 8 Ask your dealer for details. 9 10 to register to the repeater that has the strongest RSSI level in the last registered site or adjacent site. This roaming type takes The [Site Select] key allows you to manually select the desired site without a roaming scan operation. 11 time than other roaming types. Ask your dealer for details. 12 q P ush [Site Select] to show the Site Select screen. w P ush [CH Up] or [CH Down] to select the desired site from 13 the preprogrammed roaming list*. 14 * Up to 48 valid roaming areas are listed on the roaming list. Ask your dealer for details. 15 e P ush [Site Select] again to set the selected site, and return 16 to the standby mode. r T he transceiver tries to register to the selected site. 29