Icom IC-F6061D Instruction Manual - Page 10
Rx Speaker Key, Light Key, Lock Key, Lone Worker Key, High/low Key, Tone/ran Ch Select Key
View all Icom IC-F6061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1 PANEL DESCRIPTION RX SPEAKER KEY Push to turn the RX speaker function ON or OFF. When the RX speaker function is turned ON, the received audio can be heard via the external speaker. • This function is available when the external speaker is additionally connected. • This function is useful when you are out of the vehicle. • The audio output level is linked to the transceiver's volume control. LIGHT KEY Push to turn the transceiver's backlight ON for about 5 seconds when the backlight function is turned OFF in user set mode. LOCK KEY Hold down to electronically lock all programmable keys except the following: [Moni(Audi)], [Light], [Lock], [Call] (incl. Call A and Call B), [Emergency], [Surveillance], [Lone Worker] and [OPT 1/2/3]. LONE WORKER KEY Push to turn the Lone Worker function ON or OFF. • If the Lone Worker function is activated, the Emergency function is automatically turned ON after the specified time period has passed with no operation is performed. HIGH/LOW KEY Push to select the transmit output power temporarily or permanently, depending on the pre-setting. • Ask your dealer for the output power level for each selection. TONE/RAN CH SELECT KEY ➥ While in analog mode operation, push to enter the con- tinuous tone channel selection mode. Then select the desired tone frequency/code setting with [CH Up] or [CH Down]. After the selection, push this key again to set. ➥ While in digital mode operation, push to enter the RAN channel selection mode. Then select the desired RAN setting with [CH Up] or [CH Down]. After the selection, push this key again to set. ➥ While in mixed (digital and analog) mode operation, push to enter the continuous tone channel selection mode. Then select the desired tone frequency/code setting with [CH Up] or [CH Down]. After the selection, push this key to set. After that, the RAN channel selection screen appears. Select the desired RAN setting with [CH Up] or [CH Down]. After the selection, push this key again to set. C.TONE CH ENT KEY Push to select the continuous tone channel using [CH Up]/ [CH Down] to change the tone frequency/code setting after pushing this key. The selected channel remains set as the continuous tone channel until another channel is designated as such. (Analog or mixed mode operation only) TALK AROUND KEY Push to turn the talk around function ON and OFF. • The talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. 5