Icom IC-F9011 / F9021 Instruction Manual - Page 13

PANEL DESCRIPTION 2 1 ZONE KEY "ZONE" SCAN ADD/DEL (TAG) KEY "SCAD" 2 Push this key, then push [CH Up] or [CH Down] to select the Push to add or delete the selected channel to/from the scan 3 desired zone. When [Rotary selector] selects "operating zone," push this list. 1. Push to indicate the scan list, then push [CH Up] or 4 key to switch the range of selectable zones. [CH Down] to select the desired list. 5 2. Push to add or delete the channel to/from the selected What is "zone"?- Selected channels are assigned to a scan list. 6 zone according to how they are to be used in a group. For 3. Push and hold for 1 sec. to exit the scan list selection 7 example, 'Staff A' and 'Staff B' are assigned into a "Busi- mode. ness" zone, and 'John' and 'Cindy' are assigned into a "Pri- 8 vate" zone. SCAN A KEY "SCNA" PRIO A AND PRIO B KEYS "PRA" "PRB" 9 Push to select Priority A or Priority B channel. 10 ➥ Push to start and cancel scanning operation. • When Power ON Scan function is activated, push to pause the PRIO A REWRITE AND PRIO B REWRITE KEYS "PRAR" "PRBR" 11 scanning operation. And the paused scan resumes after the ➥ Push to select Priority A or Priority B channel. 12 specified time period has passed. ➥ Push and hold this key for 1 sec. to indicate the scan list, ➥ Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec. to rewrite the operating channel as the Priority A or 13 then push [CH Up] or [CH Down] to select the desired list. Priority B channel. 14 (Available depending on the presetting.) MR-CH 1, MR-CH 2, MR-CH 3 AND MR-CH 4 KEYS 15 SCAN B KEY "SCNB" ➥ Push to start and cancel scanning operation. "CH1" "CH2" "CH3" "CH4" 16 Push to select the memory channels 1, 2, 3 and 4 directly. The scan restarts after the specified time period has passed when the scan (started with this key) is cancelled MONI KEY "MON" by except for this key operation. Push to mute and release the CTCSS (DTCS), NAC or Talk- ➥ Push and hold this key for 1 sec. to indicate the scan list, group ID squelch mute. Open any squelch/deactivate any then push [CH Up] or [CH Down] to select the desired list. mute while pushing and holding this key.