Icom IC-F9521 Instruction Manual - Page 10

1 PANEL DESCRIPTION SCAN ADD/DEL (TAG) KEY "SCAD" MR-CH 1/2/3/4 KEYS ➥➥Push to add a channel to, or delete it from the current scan Push to select the memory channel 1, 2, 3 or 4. list. • When a channel is added to the current scan list, the display MONI KEY quickly shows "SCAN ON." When a channel is deleted from the current scan list, the display quickly shows "SCAN OFF." After showing "SCAN ON" or "SCAN OFF," the display quickly shows the current scan list text. ➥➥You can add a channel to, or delete it from the scan list after selecting the list. 1. Hold down for 1 second to display the current scan list, and then push [CH Up] or [CH Down] to select a desired list. ➥ P ush to mute and release the CTCSS (DTCS), 2-tone, NAC or Talkgroup ID squelch mute. Open any squelch/ deactivate any mute while pushing and holding this key. • Depending on the pre-setting, the 'Audible' (unmute) condition may automatically return to the 'Inaudible' (mute) condition, after a specified time period. ➥ D epending on the pre-setting, pushing and holding this key for 1 sec. cancels the scan. 2. Push this key to add a channel to, or delete it from the selected list. • When a channel is added to the selected scan list, the display quickly shows "SCAN ON." When a channel is deleted from the selected scan list, the display quickly shows "SCAN OFF." 3. Hold down this key for 1 second to exit the scan list TALK AROUND KEY (Conventional operation only) Turn the talk around function ON or OFF. • T he talk around function equalizes the transmit frequency to the receive frequency for transceiver-to-transceiver communication. selection mode. ➥➥Push this key while a scan is paused on a channel, except for primary or secondary channel, and then the channel is PUBLIC ADDRESS KEY Push to activate the Public Address (PA) function. When the PA function is activated, the audio output can be controlled deleted from the scan list. • Depending on the setting, the deleted channel is added to the scan list again after the scan is cancelled. (Nuisance Delete function) from the transceiver separately with [CH Up] or [CH Down] or rotate [CH Up/Down]*. • T his function is available when the external unit, such as an audio amplifier, speaker, etc. is additionally connected. (p. 14) PRIO A/B KEYS ➥ Push to select Priority A or Priority B channel. • Push this key, then speak into the microphone while pushing and holding [PTT]. ➥ P ush and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 sec. to assign the operating channel to the Priority A or Priority B channel. *Simple type only 5