Icom IC-F9521 Instruction Manual - Page 9

PANEL DESCRIPTION 1 n Programmable function keys 1 2 The following functions can be assigned to [DIAL]*, [UP], What is "zone"?-The desired channels are assigned [DOWN], [P0], [P1], [P2], [P3] and [P4] programmable func- into a zone according to the intended use for grouping. 3 tion keys. Consult your Icom dealer or system operator for details con- For example, 'Staff A' and 'Staff B' are assigned into a "Business" zone, and 'John' and 'Cindy' are assigned into 4 cerning your transceivers programming. a "Private" zone. 5 If the programmable function names are bracketed in the following explanations, the specific key is used to activate the SCAN KEY 6 function depends on the programming. ➥ Push to start and cancel scanning operation. 7 *The functions you can assign to [DIAL] are limited. (Only functions marked with ✩ can be assigned.) • W hen the Power ON Scan or Auto Scan function starts a scan, push this key to cancel the scan. The canceled scan resumes 8 ✩ CH UP AND DOWN KEYS ➥ Push (or Rotate)* to select an operating channel. after a specified time period. ➥ Push and hold this key for 1 sec. to indicate a scan group, 9 then push [CH Up] or [CH Down] or rotate [CH Up/Down]* 10 ➥ P ush (or Rotate)* to select a scan group after pushing to select the desired one. (Depending on the pre-setting.) 11 and holding [Scan]. *Rotate when this function is assigned to [DIAL]. 12 13 ✩ ZONE UP AND DOWN KEY (This function is for [DIAL] only) Rotate to select the desired zone. 14 ZONE KEY 15 Push this key, then push [CH Up] or [CH Down] or rotate [CH 16 Up/Down]* to select the desired zone. *Simple type only 4