Icom IC-M36 Instruction Manual - Page 22

6 DUALWATCH/TRI-WATCH ■ Description Dualwatch monitors Channel 16 while you are receiving on another channel; Tri-watch monitors Channel 16 and the call channel while receiving another channel. Dualwatch/Triwatch is convenient for monitoring Channel 16 when you are operating on another channel. DUALWATCH/TRI-WATCH SIMULATION Ch 16 Ch 88 Ch 88 Ch 16 Ch 88 Call channel Ch 9 ■ Operation q Select Dualwatch or Tri-watch in the set mode. (p. 19) w Select the desired channel. e P ush and hold [SCAN DUAL] for 1 sec. to start Dualwatch or Tri-watch (depending on the set mode setting). • "DUAL" blinks during Dualwatch; "TRI" blinks during Tri-watch. • A beep tone sounds when a signal is received on Channel 16. • Tri-watch becomes Dualwatch when receiving a signal on the call channel. r T o cancel Dualwatch/Tri-watch, push [SCAN DUAL] again. [Example]: Operating Tri-watch on INT channel 07. Tri-watch starts. Signal is received on call channel. Dualwatch Tri-watch • If a signal is received on Channel 16, Dualwatch/Triwatch pauses on Channel 16 until the signal disappears. • If a signal is received on the call channel during Triwatch, Tri-watch becomes Dualwatch until the signal disappears. • To transmit on the selected channel during Dualwatch/ Tri-watch, push and hold [PTT]. Tri-watch resumes after the signal disappears. Signal received on Channel 16 takes priority. 16