Icom IC-M88 Instruction Manual - Page 22
Land Channel Operation
View all Icom IC-M88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
7 LAND CHANNEL OPERATION LAND Channel Group A max. of 22 free LAND mobile channels (allocated 146.000 to 174.000 MHz) can be programmed into the LAND channel group for simple communication with LMR transceivers in the VHF band. Moreover, any of the marine channels in the USA, INT and CAN channel groups can be programmed. The default setting of the LAND channel group is the same as that of the INT channel group. Ask your local Icom dealer for the LAND channel group setting and LMR frequency programming details. q Push [CH/WX•U/I/C/L] to select a regular channel. • If a weather channel appears, push [CH/WX•U/I/C/L] again. w To change the channel group, push [CH/WX•U/I/C/L] for 1 sec several times. •" " appears when LAND channel group is selected. e Push [Y]/[Z] to select a channel. • "DUP" appears for duplex channels. Push U/I/C/L Function display When Narrow, DTCS or CTCSS is set, the display shows the indications as below. Appears when Narrow channel spacing is set. Appears when DTCS is set. Appears when CTCSS set. NOTE: The basic settings (e.g. call channel programming) are same as the U.S.A., International and Canadian channels. Refer to the appropriate pages for details. 16