Icom IC-R75 Instruction Manual - Page 36

9 SET MODE • Recorder remote This item sets the [REC REMOTE] jack function ON or OFF. • CI-V address To distinguish equipment, each CI-V transceiver or receiver has its own Icom standard address in hexadecimal code. The IC-R75's address is 5Ah. When 2 or more IC-R75's are connected to an optional CT-17 ci-v level converter, rotate the tuning dial to select a different address for each IC-R75 in the range 01h to 7Fh. • CI-V baud rate This item sets the data transfer rate. "3" (300 bps), "12" (1200 bps), "48" (4800 bps), "96" (9600 bps), "HI" (19200 bps) and "At" (automatic) are available. When "At" is selected, the baud rate is automatically set according to the connected controller or remote controller. • CI-V transceive Transceive operation is possible with the IC-R75 connected to other Icom HF transceivers or receivers. When "on" is selected, changing the frequency, operating mode, etc. on the IC-R75 automatically changes those of connected transceivers (or receivers) and vice versa. • CI-V with IC-735 When connecting the IC-R75 to the IC-735 for transceive operation, you must change the operating frequency data length to 4 bytes. • This item must be set to "ON" only when operating receiver with the IC-735. • Speech language When the optional UT-102 voice synthesizer unit is installed, you can select between English and Japanese as the language. • "En" English announcement • "JP" Japanese announcement See p. 34 for unit installation. 32