Icom M220 Instruction Manual - Page 26
Entering the position and time, Deleting an entered ID
View all Icom M220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7 DIGITAL SELECTIVE CALLING (DSC) DDDeleting an entered ID (Example: Deleting an Individual ID: STATION 2) 1. Open the "INDIVIDUAL ID" screen. [MENU] > DSC Settings > Individual ID 2. Select "STATION 2," and then push DEL . ••"Are You Sure?" is displayed. 3. Push OK to delete. LL Push CANCEL to cancel the deletion. ••The selected ID is deleted, and then returns to the previous screen. TIP: You can edit an ID and its name by pushing EDIT in step 2. ■■ Entering the position and time A Distress call should include the vessel's position, date, and time. If no GPS data is received, manually enter the position and Universal Time Coordinated (UTC) time. NOTE: ••The manual entry is disabled while valid GPS data is received. ••The manually entered position and time is valid only for 23.5 hours, or until turning OFF the transceiver. 1. Open the "POSITION INPUT" screen. [MENU] > DSC Settings > Position Input 2. Enter the latitude. TIP: ••Select a number or a compass direction using Select "←" or "→" on the screen to move the cursor. ••Push [ENT] or FIN to save the selected number. 3. Enter the longitude and the UTC time. LL See the TIP in step 2 to enter. 4. Push FIN to set the entered position and time. 5. Push EXIT to return to the standby screen. ••The "DSC Settings" screen is displayed. 16