Icom M424G Instruction Manual - Page 35
shown below is displayed. Edit your latitude and longitude, position and UTC time as follows
View all Icom M424G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
DSC OPERATION 7 ttAfter transmitting the call, the transceiver waits for an acknowledgment call. • T he Distress call is automatically transmitted every 3.5 to 4.5 minutes, until an acknowledgement is received ('Call repeat' mode), or DSC cancel call is made (p. 26). • Push [RESEND] to manually transmit the Distress repeat call. • Push then push [INFO] to display the transmitted Distress call information. • Push then push [PAUSE] to pause the 'Call repeat' mode, push [RESUME] to resume it. yyAfter receiving an acknowledgment call, push [ALARM OFF] then reply using the microphone. ➥➥A distress alert contains: • Nature of distress: Selected in step w. • Position information: The latest GPS or manually entered position is held for 23.5 hours, or until the power is turned OFF. When no GPS receiver is connected and built-in GPS re- 1 ceiver* is not receiving valid position data, and both posi- 2 tion and time have been manually entered, the screen as shown below is displayed. Edit your latitude and longitude 3 position and UTC time as follows: *For only IC-M323G and IC-M324G. 4 5 6 7 8 ➥➥Push [CHG], then edit your latitude and longitude posi- 9 tion and UTC time. • Select a desired number using Dial, or [Y]/[Z 10 • Push [ENT] or Dial to set it. 11 • T o move the cursor, select either arrow, "←" or "→," then push [ENT] or Dial. 12 • Select N (North latitude) or S (South latitude) when the cursor is on the 'N' or 'S' position. 13 • Select W (West longitude) or E (East longitude) when the cur- 14 sor is on the 'W' or 'E' position. 15 16 25