Icom MA-510TR Instruction Manual

Icom MA-510TR Manual

Get Icom MA-510TR PDF manuals and user guides View all Icom MA-510TR manuals
Add to My Manuals
Save this manual to your list of manuals

Icom MA-510TR manual content summary:

  • Icom MA-510TR | Instruction Manual - Page 1
    INSTRUCTION MANUAL CLASS B AIS TRANSPONDER MA-510TR This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
  • Icom MA-510TR | Instruction Manual - Page 2
    of troublefree operation. ■■ Important READ ALL INSTRUCTIONS carefully and completely before using the transponder. SAVE THIS INSTRUCTION MANUAL - This instruction manual contains important operating instructions for the MA-510TR. This instruction manual includes some functions that are usable only
  • Icom MA-510TR | Instruction Manual - Page 3
    the transponder's waterproof Icom Inc. declares that the versions of The crossed-out wheeledbin symbol on your product, 18 MA-510TR which have the literature, or packaging "CE" symbol on the product, reminds you that in the comply with the essential requirements support/ laws in your area. ii
  • Icom MA-510TR | Instruction Manual - Page 4
    ■■ Radio operation warning Icom requires the radio operator to meet the FCC Requirements for Radio Frequency Exposure This is the minimum safe separation distance estimated to meet all RF exposure compliance requirements. This 5 meter distance is based on the FCC Safe Maximum Permissible Exposure
  • Icom MA-510TR | Instruction Manual - Page 5
    11 before a storm. RRWARNING! NEVER place the -20°C (-4ºF) or above +60°C (+140ºF). 12 BE CAREFUL! The GPS antenna transponder where normal operation of the meets IPX7 requirements for waterproof 13 vessel may be hindered, or where it could protection. However, once the GPS cause bodily
  • Icom MA-510TR | Instruction Manual - Page 6
    not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense
  • Icom MA-510TR | Instruction Manual - Page 7
    42 ■■ Mounting the transponder 43 5 1 OVERVIEW 1 9 SPECIFICATIONS AND OPTIONS�� 45 ■■ About AIS 1 ■■ Specifications 45 6 ■■ AIS classes 1 ■■ Options 46 7 2 PANEL DESCRIPTION 2 10 MAINTENANCE 47 ■■ Front panel 2 ■■ Function display 3 ■■ Troubleshooting 47 8 ■■ Error messages
  • Icom MA-510TR | Instruction Manual - Page 8
    Position Indicating Radio Beacon-AIS (EPIRB-AIS). There are 2 classes of AIS units, which are installed on vessels, Class A and Class B. Under the Safety Of Life At Sea (SOLAS) convention, all SOLAS vessels are required to install a Class A AIS transponder: A Class B AIS transponder is designed to
  • Icom MA-510TR | Instruction Manual - Page 9
    LEFT/RIGHT KEYS [◄]/[►] between the AIS (Plotter), AIS and Steering, AIS and Highway, and 11 ••Push to select an AIS target, and so Highway screens. in the voice channel selection screen. Hold down for 1 second to turn the transponder ON or OFF. 18 (p. 31) 4 CLEAR KEY [CLR] Push to cancel
  • Icom MA-510TR | Instruction Manual - Page 10
    push [CLR] to clear it. ••"Priority interrupted last attempts." is displayed when the transponder cannot make a periodic transmission because the transponder detects a transmit signal. ••"Coast Station inhibiting AIS TX. XX min" is displayed when transmission is inhibited by a coast station for the
  • Icom MA-510TR | Instruction Manual - Page 11
    data" on page 8. ■■ Entering the MMSI code The Maritime Mobile Service Identity (MMSI: DSC self ID) code consists of 9 digits. This entry, the transponder operates as just an AIS receiver. After skipping, you can also enter the code in "MMSI" on the Menu screen. (p. 6) [MENU] > AIS settings > Own
  • Icom MA-510TR | Instruction Manual - Page 12
    is displayed. 2. Push [▲] or [▼] to select "AIS settings," and then push [ENT]. ••The "AIS SETTINGS" screen is displayed. LL Holding down [▲] or select or enter an option or value, and then push [ENT]. ••The transponder returns to the previous screen. TIP: ••Select a number, character, or space
  • Icom MA-510TR | Instruction Manual - Page 13
    PREPARATION 3 DDOwn ship data items MMSI Type of ship 1 Enter the vessel's MMSI code. LL See page 4 for details. Select your vessel type. LL The selectable ship types may differ, 2 LL If the MMSI code has already been set, depending on the presetting. you cannot change it. 3 Name of
  • Icom MA-510TR | Instruction Manual - Page 14
    used to set items, select options, and so on for the transponder's functions. See page 33 for the Menu items description. ■■ Menu To select an item, push [▲] or [▼]. AIS list Target list Danger list Friends list AIS settings TX North up/Course up AIS display setting CPA/TCPA Alarm CPA TCPA Slow
  • Icom MA-510TR | Instruction Manual - Page 15
    [▼] to select "OFF," and then push [ENT]. ••"OFF" is set, and the transponder returns to the 11 previous screen. 12 TIP: ••To exit the Menu screen, push [ . 16 2. Push [▲] or [▼] to select "AIS information," and then push [ENT]. 17 ••The "AIS INFORMATION" screen is displayed. 3. Push [▲] or
  • Icom MA-510TR | Instruction Manual - Page 16
    you use is not set, the "LANGUAGE" screen is displayed. (p. 36) LL Push [CLR] to skip the setting. If the language is not set, the transponder displays in English. ••When no MMSI is set, three beeps sound, and "Push [ENT] to register your MMSI. You can enter between 200000000 and 799999999
  • Icom MA-510TR | Instruction Manual - Page 17
    Day mode" or "Night mode." 5 6 7 3. Push [◄] or [►] to adjust the backlight level, and then 8 push [ENT]. ••The backlight level is set, and the transponder returns 9 to the previous screen. LL The backlight level is adjustable in 7 levels and "OFF." 10 "OFF" is selectable only for the Day
  • Icom MA-510TR | Instruction Manual - Page 18
    Select "Details," and then push [ENT] to display the detail screen. (p. 19) ••The "DETAILS" screen is displayed. NOTE: An alarm sounds when a malfunction occurs, an AIS target is closer than the CPA and TCPA settings, and so on, depending on the presetting. To stop the alarm buzzer, push any key. LL
  • Icom MA-510TR | Instruction Manual - Page 19
    in "North up/ Course up" on the Menu screen. (p. 21) [MENU] > AIS settings > North up/Course up LL When "N-UP" is displayed, the top of the plotter in red or white while in the Night mode (pp. 10, 36) when the AIS target is closer than your CPA and TCPA settings (Danger target). (p. 21) LL A
  • Icom MA-510TR | Instruction Manual - Page 20
    as the range of anchor watch. 10 TARGET BOX Displays the selected AIS target. LL When a target box is displayed, push [ENT] and select "Details" to filtered to the displayed type. (p. 21) [MENU] > AIS settings > AIS display setting Indicator Description Only Danger targets are displayed. Only
  • Icom MA-510TR | Instruction Manual - Page 21
    line that marks when the vessel goes off course. 17 7 NAVIGATION LINE Displays a line from the start position of 18 navigation to the AIS target or waypoint. 8 YOUR VESSEL ICON Displayed according to the destination's position. LL When your vessel moves less than 2 knots, is displayed. 9 RNG
  • Icom MA-510TR | Instruction Manual - Page 22
    displayed while in the MOB mode. Own ship Position (Latitude, Longitude) UTC SOG (Speed Over Ground) COG (Course Over Ground) Class A, Class B, AIS-SART, AIS-MOB EPIRB-AIS, and SAR vessel MMSI code or name Position (Latitude, Longitude) CPA (Closest Point of Approach) TCPA (Time to CPA) SOG (Speed
  • Icom MA-510TR | Instruction Manual - Page 23
    7 ••The list screen is displayed. 8 9 4. Push [▲] or [▼] to select an AIS target. 10 5. Push [ENT] to display the Menu window. ••The Menu window is screen is displayed. 13 NOTE: An alarm sounds when a malfunction occurs, an AIS target is closer than the CPA and TCPA settings, and 14 so on,
  • Icom MA-510TR | Instruction Manual - Page 24
    degree) 1 THE NUMBER OF TARGETS Displays the number of AIS targets that the transponder detects. 2 DANGER TARGET INFORMATION Displays the following AIS target information. ••Target icon LL "A" or "B" is also displayed next to , depending on the vessel class. ••MMSI code or name LL When a Friend is
  • Icom MA-510TR | Instruction Manual - Page 25
    . 12 4. Select "Register as a Friend," and push [ENT]. •• is displayed. 13 Selecting on the plotter display: 14 1. Push [◄] or [►] to select an AIS target. ••A target box is displayed around the selected target. 15 (p. 13) 2. Push [ENT] to display the Menu window. 16 ••The Menu window is
  • Icom MA-510TR | Instruction Manual - Page 26
    Stern to antenna length Port side to antenna length Starboard side to antenna length Length Beam Type of ship Elapsed time AIS-SART, AIS-MOB, and EPIRB-AIS AIS class MMSI code CPA (Closest Point of Approach) TCPA (Time to CPA) Position (Latitude, Longitude) SOG (Speed Over Ground) COG (Course Over
  • Icom MA-510TR | Instruction Manual - Page 27
    L: Low)) Range Bearing Length Beam Elapsed time AtoN and AtoN virtual AIS class MMSI code Target name CPA (Closest Point of Approach) TCPA (Time (ICOM). 14 The second part is the generation number for the AIS transponder under 15 Icom products. It is fixed at "02," and means the MA-510TR. 16
  • Icom MA-510TR | Instruction Manual - Page 28
    represents North. Course up: The top of the plotter screen represents the direction your vessel's course over ground. AIS display setting You can select whether or not to limit the AIS or waypoint targets that are displayed on the plotter display. You can easily see the plotter display. LL The
  • Icom MA-510TR | Instruction Manual - Page 29
    vessel that is at anchor or drifting Enter an MMSI (Maritime Mobile Service Identity) code not to sound a 1 is unreliable, and therefore (in 0.1 kn displayed. ••"No ID" is displayed if there is no 8 blocked AIS transponder. 2. Push [ENT] to display the Menu 9 window. ••The Menu window is
  • Icom MA-510TR | Instruction Manual - Page 30
    saved in your RX log. See below for details. DDMessage logs The transponder saves up to 20 received messages in your RX log. The oldest is an unread message. 1. Open the "RX log" screen. [MENU] > AIS Information > AIS messages > RX log ••"No message" is displayed when there is no received message
  • Icom MA-510TR | Instruction Manual - Page 31
    screen is displayed. 9 10 11 12 13 14 DDNavigating to a waypoint 15 The transponder assists you to navigate to a selected waypoint in the Waypoint list. 16 LL See then push [ENT] to start navigation. ••The AIS and Highway screen is displayed, and the transponder starts to navigate. 24
  • Icom MA-510TR | Instruction Manual - Page 32
    current position information is automatically displayed. 10. Select [Finish], and then push [ENT] to save the longitude. ••The waypoint is saved, and the transponder returns to the previous screen. LL If you enter a longitude that is out of range, a popup screen is displayed. Push any key to return
  • Icom MA-510TR | Instruction Manual - Page 33
    push [ENT]. ••"Delete waypoint. Are you sure?" is displayed. 15 16 17 5. Select "OK," and then push [ENT]. ••The selected target is deleted, and the transponder 18 returns to the previous screen. 26
  • Icom MA-510TR | Instruction Manual - Page 34
    is receiving valid GPS signals. LL The transponder automatically exits the Navigation mode if it is in that mode. DDStarting MOB zz Hold down [WPT/MOB] for 1 second to start the MOB mode. ••Three beeps sound. ••The AIS screen is displayed, and is displayed in your current position on the
  • Icom MA-510TR | Instruction Manual - Page 35
    when the transponder is receiving valid GPS signals. 1 LL The function cannot work while in the MOB mode. NOTE: MA-510TR's Navigation then push [ENT] to start navigation. ••The AIS and Highway screen is displayed, and the transponder starts to navigate. Selecting in the Waypoint list:
  • Icom MA-510TR | Instruction Manual - Page 36
    displayed. 4. Select "OK," and then push [ENT] to start navigation. ••The target's current position is set as a waypoint. ••The AIS and Highway screen is displayed, and the transponder starts to navigate. NOTE: ••An alarm sounds, and a popup screen is displayed when the vessel arrives at or near the
  • Icom MA-510TR | Instruction Manual - Page 37
    faster than 23 knots while changing course 30 seconds N/A 17 9 Vessel is moving faster than 2 knots N/A 180 seconds N/A 18 *1 AIS Class B does not provide information about the navigational status, anchored or moored. *2 CS: Carrier-sense, *3 SO: Self organized ••Others Category SAR
  • Icom MA-510TR | Instruction Manual - Page 38
    NMEA1 must be set to 4800 bps to send an Individual DSC call using the transponder. 1. Select an AIS target on the plotter display, Target, Danger, or Friends list screen. (pp. the acknowledgment from the AIS target, use the transceiver to communicate. See the transceiver's manual for details. 31
  • Icom MA-510TR | Instruction Manual - Page 39
    alarm range XTE alarm range p. 17 p. 21 p. 22 p. 6 pp. 24, 33 pp. 29, 33 p. 33 Friends Friends list Friends alarm NMEA settings NMEA 0183 AIS out External GPS in NMEA in/out NMEA 2000 GPS Configuration Backlight Key beep Audible alarm CPA/TCPA Received message Arrival XTE Others Internal GPS
  • Icom MA-510TR | Instruction Manual - Page 40
    details. Reset navigation zz Function You can select whether or not to sound an alarm when your vessel is at anchor, and has drifted. The transponder resets the start position, and restarts navigation from your current position. LL See page 29 for details. Track zz Display You can select whether
  • Icom MA-510TR | Instruction Manual - Page 41
    speed, depending on the equipment. zz AIS out The data transfer speed to transmit the data to an AIS transponder. LL The value is fixed at 38400 "GPS" screen. [MENU] > NMEA settings > NMEA 2000 > GPS ••The transponder starts searching the devices connected to the NMEA 2000 network. LL Push [CLR]
  • Icom MA-510TR | Instruction Manual - Page 42
    GPS signal does not include "129545 GNSS RAIM Output," the transponder will not receive the signal from the external GPS receiver. 059392 Satellite System) Position Data AIS Class A Position Report AIS Class B Position Report AIS Class B Extended Position Report AIS Aids to Navigation (AtoN)
  • Icom MA-510TR | Instruction Manual - Page 43
    is received. 12 zz Arrival The alarm for when the vessel arrives at AIS messages 13 or near the destination zz XTE RX log Displays the received messages message, Arrival, and XTE alarm. Status 17 Displays your transponder's current status information. 18 Internal GPS SBAS The SBAS (
  • Icom MA-510TR | Instruction Manual - Page 44
    log Displays the type, date, and time of the last 25 malfunctions that were detected. DDRadio information Displays your transponder's Serial number, Software version, AIS engine version, and GPS engine version. Alarm type Date Time Description of the alarm type Alarm type Description Displayed
  • Icom MA-510TR | Instruction Manual - Page 45
    8 CONNECTIONS AND INSTALLATION ■■ Supplied accessories DC power cable Mounting bracket For the mounting bracket 1 (OPC-2385 (approximate): Knob bolts Flat washers (M5) 2 2.7 m, 8.9 ft) Screws 3 (5 × 20 mm) Spring washers (M5) 4 5 Accessory GPS antenna For the GPS antenna 6 connector
  • Icom MA-510TR | Instruction Manual - Page 46
    8 CONNECTIONS AND INSTALLATION ■■ GPS antenna connection NOTE: Be sure the GPS antenna is positioned where the GPS antenna has a clear view to receive signals from satellites. DDInstallation 1. Mount the bracket securely to the desired position. LL Screws for mounting the bracket are user supplied.
  • Icom MA-510TR | Instruction Manual - Page 47
    . Requirements of AIS messages or GPS data. LL A USB cable (A - mini B type) is user supplied. LL To use the USB cable, you must first install a USB driver. The latest USB driver and installation guide can be downloaded from the Icom website (https://www.icomjapan. com/support/). Read the guide
  • Icom MA-510TR | Instruction Manual - Page 48
    requires the GBS sentence output. Pin bps) 7 AIS OUT (+) 8 AIS OUT (-) 9 TX OFF Output level: 5 V/40 mA (maximum) AIS target is closer than your CPA and TCPA settings, or so on. - Disconnected *1 Only 38400 bps. *2 When a received GPS signal does not include a GBS sentence, the transponder
  • Icom MA-510TR | Instruction Manual - Page 49
    DSC call can be made to the AIS target using the transponder without 8 entering the target's MMSI code. (p. 31) Connect each lead to the appropriate lead as follows. 9 See the instruction manual of each for transceiver's connecting instructions. LL The following transceivers can operate with
  • Icom MA-510TR | Instruction Manual - Page 50
    . 1. Mount the bracket securely to a surface which is more than 10 mm (0.39 in) thick and can support more than 3 kg (6.6 lb) using the 4 supplied screws (5 × 20 mm). NOTE: When mounting the transponder on a board, fix the bracket to the board using the user supplied bolts and nuts, as shown below
  • Icom MA-510TR | Instruction Manual - Page 51
    DDMB-132 installation An optional MB-132 flush mount kit is used to mount the transponder to a flat surface such as an instrument panel. 14 15 16 5. Tighten the locking nuts (rotate counterclockwise) so that the transponder is securely mounted in position, 17 as shown to the right. 18
  • Icom MA-510TR | Instruction Manual - Page 52
    525 MHz Type of emission AIS DSC 16K0GXW (GMSK) 16K0G2B Antenna impedance 50 Ω nominal Intermediate frequency CH-A CH-B 1st: 21.700 MHz, 2nd: 450 kHz 1st: 30.150 MHz, 2nd: 450 kHz Operating temperature range -20°C ~ +60°C, -4ºF ~ +140ºF Power supply requirement Negative ground: 12 V or 24
  • Icom MA-510TR | Instruction Manual - Page 53
    10 11 12 166.2 (6.5) 26.2 66.3 (2.3) (1) 13 MA-510TR with the mount bracket 186 (7.3) GPS antenna 26.2 (1) 966.26.(33.(82).3) 14 15 145 (5.7) 16 17 18 164 (6.5) 66.2 (2.6) ■■ Options ••MB-132/MB-75 flush mount kit To mount the transponder to a panel. unit: mm (inch) 46 130.1 (5.1) 225
  • Icom MA-510TR | Instruction Manual - Page 54
    10 MAINTENANCE ■■ Troubleshooting The transponder does not turn ON. zz Bad connection to the power supply. →→Check the connection to the transponder and power supply. (p. 40) zz The fuse is blown. →→Repair the problem, and then replace the fuse. (p. 42) You cannot transmit. zz 1 minute has not
  • Icom MA-510TR | Instruction Manual - Page 55
    60 seconds. GPS data 3 RX malfunction No Displayed when the transponder receive circuit has failed. RCV 4 RX malfunction CH A Displayed TX malfunction failed. Displayed when the protective circuit cuts off the AIS signal after 9 Continuous TX 1 second of continuous transmission. Antenna
  • Icom MA-510TR | Instruction Manual - Page 56
    11 AtoN CODE DESCRIPTION The following table lists all the AtoN codes that are displayed on the detail screens of an "AtoN" or "AtoN virtual." (p. 20) Type of AtoN Code Description 0 Default, Type of AtoN not specified 1 Reference point 2 RACON 3 Fixed structures off-shore, such as oil
  • Icom MA-510TR | Instruction Manual - Page 57
    12 TEMPLATE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 166�2 (6 17⁄32) 147 (5 25⁄32) Cut here R12 (15⁄32) Maximum 93�3 (3 11⁄16) 110�2 (4 11⁄32) Unit: mm (inch) 50
  • Icom MA-510TR | Instruction Manual - Page 58
  • Icom MA-510TR | Instruction Manual - Page 59
    screen Specifications 45 About AIS 1 AIS 12 T 1 AIS classes 1 AIS list Danger list 17 Friends list 17 Target list 17 Using 16 AIS and Highway 14 AIS and Steering 13 Highway 14 Information box 15 Using 11 MB-132 installation 44 Template 50 Transceiver Connecting 42 Individual
  • Icom MA-510TR | Instruction Manual - Page 60
    MEMO
  • Icom MA-510TR | Instruction Manual - Page 61
    MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
  • Icom MA-510TR | Instruction Manual - Page 62
    MEMO
  • Icom MA-510TR | Instruction Manual - Page 63
    MEMO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
  • Icom MA-510TR | Instruction Manual - Page 64
    A7549D-1EX-2 Printed in Japan © 2019-2020 Icom Inc. Sep. 2020 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
INSTRUCTION MANUAL
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful interference.
CLASS B AIS TRANSPONDER
MA-510TR