Icom MA-510TR Instruction Manual - Page 16
BASIC OPERATION, Turning ON the transponder
View all Icom MA-510TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5 BASIC OPERATION ■■ Turning ON the transponder IMPORTANT: BE SURE to connect a GPS antenna or receiver and a marine VHF antenna to the transponder before turning ON the transponder. (p. 40) 1. Hold down [ ] for 1 second to turn ON the transponder. ••The opening screen is displayed. 2. The result of the self check (ROM, RAM, and backup data test) is displayed on the opening screen, "OK" or "failed" (No Good). ••If "failed" is displayed, hold down [ ] for 1 second to turn OFF the power, and then turn it ON again. If there is no change, contact your dealer. ••When the language that you use is not set, the "LANGUAGE" screen is displayed. (p. 36) LL Push [CLR] to skip the setting. If the language is not set, the transponder displays in English. ••When no MMSI is set, three beeps sound, and "Push [ENT] to register your MMSI. You can enter between 200000000 and 799999999." is displayed. (p. 4) 3. After the self check is completed, the "Searching GPS" screen is displayed while searching for a GPS satellite. LL While searching, you can enter the Menu screen by pushing [MENU]. (p. 7) 4. When GPS data is received, it is automatically displayed on the plotter screen. 9