Icom VE-PG4 Precautions

–

4

–

–

1

–

A7487W-1EX

Printed in Japan

© 2019

Icom Inc.

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

PRECAUTIONS

RoIP Gateway

Thank you for choosing this Icom product.

This product is designed and built with Icom’s state of

the art technology and craftsmanship. With proper care,

this product should provide you with years of trouble-free

operation.

Feb. 2019

READ ALL INSTRUCTIONS

carefully

and completely

before using the RoIP Gateway.

SAVE THESE INSTRUCTIONS

—

These instructions

contain important safety and operating instructions for the

RoIP Gateway.

WORD

DEFINITION

R

WARNING!

Personal injury, fire hazard or electric

shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk

of personal injury, fire or electric shock.

■

For the RoIP Gateway

R

WARNING! NEVER

use other than the specified AC

adapter. This may result in an electrical shock, cause a fire

or damage the RoIP Gateway.

R

WARNING! NEVER

use non-specified accessories or

options. This may result in an electrical shock, cause a fire

or damage the RoIP Gateway.

R

WARNING! NEVER

connect the AC adapter to other

than the [DC] jack on the rear panel. This may result in an

electrical shock, cause a fire or damage the RoIP Gateway.

R

WARNING! NEVER

disassemble, modify or repair the

RoIP Gateway. This may result in an electrical shock, cause

a fire or damage the RoIP Gateway.

R

WARNING! NEVER

install the RoIP Gateway in a

wet place or outside. This may result in an electrical shock,

cause a fire or damage the RoIP Gateway.

R

WARNING! NEVER

operate or touch the RoIP

Gateway with wet hands. This may result in an electrical

shock or damage the RoIP Gateway.

R

WARNING! NEVER

connect the ground terminal to a

gas or electric pipe. This may result in an electrical shock or

cause a fire.

R

WARNING!

NEVER

use the RoIP Gateway during

a thunder and lightening storm. Using it may result in an

electrical shock, cause a fire or damage the RoIP Gateway.

Always disconnect the AC adapter before any storm.

R

WARNING!

Immediately disconnect the AC adapter

if the RoIP Gateway emits an abnormal odor, sound or

smoke. Contact your Icom dealer or distributor for advice.

CAUTION: NEVER

put the RoIP Gateway in any unstable

place (such as on a slanted surface or vibrated place). This

may cause injury and/or damage to the RoIP Gateway.

CAUTION:

NEVER

install the RoIP Gateway in

a place

without air vents. Heat dissipation may be reduced, and

this

could damage the RoIP Gateway

.

CAUTION:

Always place the RoIP Gateway in a secure

place to avoid inadvertent use by unauthorized persons.

CAUTION: DO NOT

use or place the RoIP Gateway in

areas with temperatures below 0

ç

(+32

ƒ

) or above +40

ç

(+104

ƒ

).

CAUTION: DO NOT

place the RoIP Gateway in direct

sunlight. This could damage the RoIP Gateway.

CAUTION:

DO NOT

use the RoIP Gateway in strong

magnetic fields or in an area with high static electricity.

This

could damage the RoIP Gateway.

CAUTION:

Disconnect the AC adapter when you will not

use the RoIP Gateway fo

r a long period of time.

CAUTION:

DO NOT

use harsh solvents such as

benzine or alcohol to clean the RoIP Gateway, as they can

damage the RoIP Gateway’s surfaces. If the RoIP Gateway

becomes dusty or dirty, wipe it clean with a dry, soft cloth.

CAUTION:

Use only the specified cable to connect a

transceiver or repeater to the RoIP Gateway. Using another

cable could cause damage to the RoIP Gateway or to the

transceiver or repeater.

IMPORTANT

PRECAUTIONS

EXPLICIT DEFINITIONS

Disconnect all cables from the RoIP Gateway, and then

connect the AC adapter.

• Verify that the [PWR] indicator lights green.

Push in and hold [MODE] on the bottom until all

indicators on the front panel light orange.

• When the initialization has been completed,

[PWR] lights green.

• After the initializing, reset the RoIP Gateway’s IP

address, operating mode, and so on.

*The indication may differ, depending on the setting.

1

2

If you cannot access to the RoIP Gateway setting screen, you can initialize the RoIP Gateway.

•

See the RoIP Gateway instruction manual for initializing from the setting screen.

• Initializing clears all the settings.

[Operation]

[Operation]

[LED indicator]

[LED indicator]

All LEDs light (Orange)

All LEDs blink (

Red → Green)

[MODE]

Release

Turn ON the power

AC

adapter

[MODE]

Push in and hold

Push in and hold

Use a pin

:Black out

<Status>

:Light

:Blink

ABOUT THE SETTING SCREEN

INITIALIZING THE RoIP Gateway

q

Open your web browser, then enter the IP address* of

the RoIP Gateway into the address bar.

*The default IP address is “192.168.0.1.”

w

Push the [ENTER] key.

• The Login Authentication screen will appear.

e

Enter “admin” (fixed username) and “admin” (default

password) in their respective input fields in the Login

Authentication window, and then click [OK].

To prevent unauthorized access

Carefully choose your password, and change it occasionally.

• Choose one that is not easy to guess.

• Use numbers, characters and letters (both lower and upper case).

About web browsers

We recommend using Microsoft Internet Explorer 11 or later with

the VE-PG4. Enable JavaScript

®

and set to allow Cookies on

your web browser to correctly display the setting screen. If other

browsers are used, the screen may not be correctly displayed.

About the setting screen

q

Link to the Icom web site

If your PC is connected to the Internet, click the Icom logo

to open the Icom web site.

w

Setting menu

Displays the screen name list on a menu line. When you

click each menu title, a list of items drops down, which you

can use to select the desired setting item.

e

Setting screen

Displays the settings and values when you click the screen

name.

r

Setting buttons

Save or cancel the setting values.

• Items and buttons may differ, depending on the setting.

Accessing the setting screen

Use the setting screen as follows.

Enter

http://192.168.0.1/

q

Enter

w

Click

q

w

r

e

Icom VE-PG4 Precautions

Icom VE-PG4 Manual

Icom VE-PG4 manual content summary: