Icom VE-PG4 Precautions - Page 1

ABOUT THE SETTING SCREEN Accessing the setting screen Use the setting screen as follows. q Open your web browser, then enter the IP address* of the RoIP Gateway into the address bar. About the setting screen q http://192.168.0.1/ Enter w *The default IP address is "192.168.0.1." w Push the [ENTER] key. e • The Login Authentication screen will appear. r e Enter "admin" (fixed username) and "admin" (default password) in their respective input fields in the Login Authentication window, and then click [OK]. q Enter w Click To prevent unauthorized access Carefully choose your password, and change it occasionally. ••Choose one that is not easy to guess. ••Use numbers, characters and letters (both lower and upper case). About web browsers We recommend using Microsoft Internet Explorer 11 or later with the VE-PG4. Enable JavaScript® and set to allow Cookies on your web browser to correctly display the setting screen. If other browsers are used, the screen may not be correctly displayed. q Link to the Icom web site If your PC is connected to the Internet, click the Icom logo to open the Icom web site. w Setting menu Displays the screen name list on a menu line. When you click each menu title, a list of items drops down, which you can use to select the desired setting item. e Setting screen Displays the settings and values when you click the screen name. r Setting buttons Save or cancel the setting values. • Items and buttons may differ, depending on the setting. INITIALIZING THE RoIP Gateway If you cannot access to the RoIP Gateway setting screen, you can initialize the RoIP Gateway. • S ee the RoIP Gateway instruction manual for initializing from the setting screen. • Initializing clears all the settings. 1 Disconnect all cables from the RoIP Gateway, and then connect the AC adapter. [Operation] • Verify that the [PWR] indicator lights green. AC adapter 2 Push in and hold [MODE] on the bottom until all indicators on the front panel light orange. Turn ON the power • When the initialization has been completed, [PWR] lights green. Push in and hold [LED indicator] :Black out :Light :Blink • After the initializing, reset the RoIP Gateway's IP address, operating mode, and so on. Use a pin [MODE] All LEDs light (Orange) All LEDs blink (Red → Green) Release [MODE] *The indication may differ, depending on the setting. - 4 - RoIP Gateway PRECAUTIONS Thank you for choosing this Icom product. This product is designed and built with Icom's state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the RoIP Gateway. SAVE THESE INSTRUCTIONS - These instructions contain important safety and operating instructions for the RoIP Gateway. EXPLICIT DEFINITIONS WORD DEFINITION RWARNING! Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. PRECAUTIONS ■ For the RoIP Gateway R WARNING! NEVER use other than the specified AC adapter. This may result in an electrical shock, cause a fire or damage the RoIP Gateway. R WARNING! NEVER use non-specified accessories or options. This may result in an electrical shock, cause a fire or damage the RoIP Gateway. R WARNING! NEVER connect the AC adapter to other than the [DC] jack on the rear panel. This may result in an electrical shock, cause a fire or damage the RoIP Gateway. R WARNING! NEVER disassemble, modify or repair the RoIP Gateway. This may result in an electrical shock, cause a fire or damage the RoIP Gateway. R WARNING! NEVER install the RoIP Gateway in a wet place or outside. This may result in an electrical shock, cause a fire or damage the RoIP Gateway. R WARNING! NEVER operate or touch the RoIP Gateway with wet hands. This may result in an electrical shock or damage the RoIP Gateway. R WARNING! NEVER connect the ground terminal to a gas or electric pipe. This may result in an electrical shock or cause a fire. R WARNING! NEVER use the RoIP Gateway during a thunder and lightening storm. Using it may result in an electrical shock, cause a fire or damage the RoIP Gateway. Always disconnect the AC adapter before any storm. CAUTION: NEVER put the RoIP Gateway in any unstable place (such as on a slanted surface or vibrated place). This may cause injury and/or damage to the RoIP Gateway. CAUTION: NEVER install the RoIP Gateway in a place without air vents. Heat dissipation may be reduced, and this could damage the RoIP Gateway. CAUTION: Always place the RoIP Gateway in a secure place to avoid inadvertent use by unauthorized persons. CAUTION: DO NOT use or place the RoIP Gateway in areas with temperatures below 0ç (+32ƒ) or above +40ç (+104ƒ). CAUTION: DO NOT place the RoIP Gateway in direct sunlight. This could damage the RoIP Gateway. CAUTION: DO NOT use the RoIP Gateway in strong magnetic fields or in an area with high static electricity. This could damage the RoIP Gateway. CAUTION: Disconnect the AC adapter when you will not use the RoIP Gateway for a long period of time. CAUTION: DO NOT use harsh solvents such as benzine or alcohol to clean the RoIP Gateway, as they can damage the RoIP Gateway's surfaces. If the RoIP Gateway becomes dusty or dirty, wipe it clean with a dry, soft cloth. CAUTION: Use only the specified cable to connect a transceiver or repeater to the RoIP Gateway. Using another cable could cause damage to the RoIP Gateway or to the transceiver or repeater. R WARNING! Immediately disconnect the AC adapter if the RoIP Gateway emits an abnormal odor, sound or smoke. Contact your Icom dealer or distributor for advice. - 1 - 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan Feb. 2019 A7487W-1EX Printed in Japan © 2019 Icom Inc.