Image Fitness 15.0 Q Treadmill English Manual - Page 6

ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and 90° screwdriver and your own Phillips screwdriver and needlenose pliers . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. For help identifying the assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags. Do not open the part bags until instructed to do so. Wheel Bolt (86)-2 2 1/2" Bolt (56)-2 1/2" Silver Screw (107)-1 3/4" Screw (39)-6 1" Tek Screw (115)-4 2 3/4" Bolt (47)-4 Star Washer (81)-4 1. Make sure that the power cord is not plugged in. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (12) so that the treadmill will be more stable. Do not fully fold the treadmill until it is completely assembled. Remove the indicated screws and the two casters from the Base (82). Discard the casters. Open part bag A. Attach the four Base Pads (97) to the bottom of the Base (82) with four 1" Tek Screws (115). 1 115 97 12 82 Washer (29)-4 97 115 Remove 115 97 115 Remove 6