Image Fitness 4.5 Bench English Manual - Page 8

Insert the Barbell 63 through the Locking Bar 62 - press bar

Get Image Fitness 4.5 Bench PDF manuals and user guides View all Image Fitness 4.5 Bench manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

6. Have a second person hold the Top Crossbar (48) so that the pull-up bar faces away from the rack, as shown. Attach the Top Crossbar (48) to the left Upright (43) with two M10 x 70mm Bolts (21), a Small Support Plate (51), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. Attach the Top Crossbar (48) to the right Upright (43) with two M10 x 70mm Bolts (21), a Small Support Plate (51), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 6 21 51 21 11 48 11 11 Pull-up Bar 11 43 43 51 21 21 7. Press a 25mm Bushing (73) into each end of the Locking Bar (62). 7 Insert the Barbell (63) through the Locking Bar (62) until the Barbell is centered in the Locking Bar. 73 62 8. Identify the Left Weight Glider (60) by looking at the position of the round tube. 8 Press a 38mm Bushing (58) into each end of the round tube on the Left Weight Glider (60). Slide the Left Weight Glider (60) onto the left end of the Barbell (63). Secure the Weight Glider to the Barbell with a hand-tightened M8 x 20mm Bolt (75). 63 Look at the drawing on page 4 to make sure that you have correctly identified the left end. The Left Weight Glider must be turned as shown in the drawing. Repeat this step with the Right Weight Glider (not shown). 8 63 73 58 60 75 58 Round tube

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
8
6.
Have a second person hold the Top Crossbar (48) so
that the pull-up bar faces away from the rack, as
shown.
Attach the Top Crossbar (48) to the left Upright (43)
with two M10 x 70mm Bolts (21), a Small Support
Plate (51), and two M10 Nylon Locknuts (11).
Do not
tighten the Nylon Locknuts yet.
Attach the Top Crossbar (48) to the right Upright (43)
with two M10 x 70mm Bolts (21), a Small Support
Plate (51), and two M10 Nylon Locknuts (11).
Do not
tighten the Nylon Locknuts yet.
6
21
51
21
11
11
11
48
11
Pull-up
Bar
51
21
21
43
43
7.
Press a 25mm Bushing (73) into each end of the
Locking Bar (62).
Insert the Barbell (63) through the Locking Bar (62)
until the Barbell is centered in the Locking Bar.
63
73
62
73
7
8.
Identify the Left Weight Glider (60) by looking at the
position of the round tube.
Press a 38mm Bushing (58) into each end of the
round tube on the Left Weight Glider (60).
Slide the Left Weight Glider (60) onto the left end of
the Barbell (63). Secure the Weight Glider to the
Barbell with a hand-tightened M8 x 20mm Bolt (75).
Look at the drawing on page 4 to make sure that
you have correctly identified the left end. The Left
Weight Glider must be turned as shown in the
drawing.
Repeat this step with the Right Weight Glider (not
shown).
75
60
58
63
Round tube
58
8