Image Fitness 5.2 Bench English Manual - Page 7
Locking Bar 34. Slide the Barbell 35 into
View all Image Fitness 5.2 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Attach an Upright (1) to each Base (7) using two 3 Joint Plates (12), four M10 x 80mm Bolts (41), and four M10 Nylon Locknuts (11). Make sure the 1 Uprights are oriented exactly as shown. Do not 41 tighten the Nylon Locknuts yet. 7 1 4. Insert a Weight Guide (18) into the indicated hole in each Base (7). Attach the Weight Guides to the Bases using two M10 x 75mm Bolts (39), four M10 Small Washers (6), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 5. Press a 25mm Bushing (48) into each end of the Locking Bar (34). Slide the Barbell (35) into the Locking Bar. 12 7 12 11 12 12 41 4 18 39 6 5 7 6 11 18 11 39 6 76 48 34 48 35 6. Press a 38mm Bushing (29) into each side of the Right Weight Glider (31). Slide the Right Weight Glider onto the indicated end of the Barbell (35) and attach it to the Barbell using an M8 x 20mm Screw (50). Do not tighten the Screw yet. Make sure the Right Weight Glider is oriented exactly as shown. 6 29 31 7 50 29 35