Image Fitness Executive 2002 English Manual - Page 16

HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the connection panel inside the cabinet. Plug the other end of the cable into the included adapter. Plug the adapter into the LINE OUT jack on your stereo. A. Plug one end of the audio cable into the jack on the connection panel inside the cabinet. Plug the other end of the cable into the LINE OUT jack on your computer. A Connection Panel on Cabinet CD VCR Amp LINE OUT LINE OUT Audio Adapter Cable A Connection Panel on Cabinet LINE OUT Audio Cable B. Plug one end of the audio cable into the jack on the connection panel inside the cabinet. Plug the other end of the cable into the included adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the LINE OUT jack on your stereo. B Connection Panel on Cabinet CD VCR Amp LINE OUT Audio Cable RCA Y-adapter Adapter B. Plug one end of the audio cable into the jack on the connection panel inside the cabinet. Plug the other end of the cable into a 3.5mm Y-adapter (available at electronics stores). Plug the Y-adapter into the PHONES jack on your computer. Plug your headphones or speakers into the other side of the Yadapter. B Connection Panel on Cabinet Audio Cable PHONES 3.5mm Y-adapter Headphones/Speakers Wire removed from LINE OUT jack 16