Image Fitness Renew 716 Spa User Manual - Page 12
Using the Controls
![]() |
View all Image Fitness Renew 716 Spa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Using the Controls Air Controls 1 and 2 Display Temperature Jet Button Button Light Temperature Button Button 1 2 1 2 Air Control 1: Determines the amount of air flowing through the hydrotherapy jets labeled 1 above. If the control is turned counterclockwise, the amount of air will increase; if the control is turned clockwise, the amount of air will decrease. Air control 2 functions in the same manner. Air Control 2: Determines the amount of air flowing through the hydrotherapy jets labeled 2 above. Jet Button: Turns the spa jets on and off. This is a two-speed button. If the button is pressed once, the spa jets will run at low speed, providing gentle hydrotherapy. If the button is pressed twice, the spa jets will run at high speed, providing moderate-pressure hydrotherapy. If the button is pressed again, the jets will shut off. The spa also features an automatic mode that heats and filters the water when the spa is left unattended. When the power to the spa is first turned on, or if the water temperature is below the set temperature, the water will be heated as required to maintain the set temperature. Note: To keep the filter and heat cycles from running, the power to the spa must be turned off. Light Button: Turns the underwater light on and off. Temperature Buttons: Control the temperature setting of the water. The temperature can be set between 80°F and 104°F. The water heats at about 6°F per hour with the cover on. Use a medical or other accurate thermometer to check the temperature of the water. Note: The word "COOL" will appear in the console display if the temperature of the water is more than 20°F cooler than the set temperature. When this happens, the heater will automatically activate to warm the water. The word "ICE" will appear in the display if the temperature drops below 40°F. If this happens, the pump will automatically circulate the water and warm the plumbing to keep the water from freezing. 12
![](/manual_guide/products/image-fitness-renew-716-user-manual-c9a6a0a/12.png)