Image Fitness Renew 716 Spa User Manual - Page 13
Maintenance
View all Image Fitness Renew 716 Spa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Maintenance The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa. MAINTENANCE SCHEDULE Daily • Check the water level and refill the spa to the level shown in step 5 on page 9. • Check the pH balance and sanitizer level. Adjust if necessary (see WATER CHEMISTRY on page 14). Weekly • Clean the spa shell at the waterline. • Check and thoroughly clean the filter (see CHECK- ING AND CLEANING THE FILTER on this page). • Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover). Monthly • Clean the spa cover (see MAINTAINING THE SPA COVER on this page). • Soak the filter for two hours in a trisodium phos- phate (TSP) solution. Rinse the filter in clean water. • Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover). Every Three Months • Drain the spa and refill it with clean water. Sanitize and test the pH of the water. • Check for any leaks around the pump or joints in the pipes. The seals will wear out over time; detecting leaks early can reduce repair costs. • Clean the interior of the spa. Do not use solvents or waxes. MAINTAINING THE SPA EXTERIOR The surround is maintanence free. It does not need to be painted or stained. Clean the surround with a mild soap solution; do not use solvents or waxes. CLEANING THE SPA SHELL The spa shell should be cleaned with a mild soap solution; do not use solvents or waxes. The spa should always be clean and dry before being moved or stored. MAINTAINING THE SPA COVER The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner on the entire cover. Rinse the cover with a garden hose to remove any cleaner residue. Dry the cover entirely. Use a non-silicone-based vinyl conditioner on the cover after you clean it. This will help protect the cover from sun damage. CHECKING AND CLEANING THE FILTER The filter should be checked periodically for build-up of dirt and oil. If the filter needs to be cleaned, follow the steps below: 1. Turn off the power. 2. Remove the filter cover. Filter Cover 4. Lift the filter out of the filter housing. Basket 5. Check the filter for Diverter dirt and debris. If the filter needs to be Filter Plug cleaned, rinse the filter with a hose. If the Filter filter is still dirty, soak Filter it in cleaning solution Housing from a pool and spa supply store. 6. Inspect the filter for damage. Replace the filter if it is dam- aged. 7. Insert the cleaned or new filter into the filter housing. 8. Re-attach the filter cover. WATER CHEMISTRY Maintaining the pH level of the water is very important to the operation of the spa. To maintain the proper pH level and to sanitize the spa, you can purchase a chemical starter kit from your local pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. Always follow these basic guidelines when handling the chemicals: 1. Always read and follow the directions on the label, unless directed otherwise. 2. Never mix different chemicals. 13