Insignia C170 User Manual (English) - Page 4

Technical information

Get Insignia C170 PDF manuals and user guides View all Insignia C170 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

2.3 Self test pattern The monitor may display a three-color test pattern. This indicates that the monitor is functioning properly, but the computer's video signal is not reaching the monitor. In this case, please make sure the video cable is properly connected. The test pattern will disappear when the monitor is receiving the video signal. However, if the test pattern does not display all three colors (blue, green and red), the monitor may not be functioning properly. Check the www.insignia-products.com website or call customer support toll free at 1-877-467-4289. 2.4 Timing guide This multi-scanning monitor can automatically detect and display several video modes. If the monitor recognizes one of the preset timing signals, it will reset that mode and any stored display adjustments you have made. The factory preset modes are indicated in the following table: Resolution Mode Fh. Fv. (dots × lines) 1 720 × 400 31.47 70 2 640 × 480 31.47 60 3 640 × 480 43.27 85 4 800 × 600 37.88 60 5 800 × 600 46.87 75 Resolution Mode Fh. Fv. (dots × lines) 6 800 × 600 53.67 85 7 800 × 600 63.90 100 8 1024 × 768 48.36 60 9 1024 × 768 60.02 75 10 1024 × 768 68.67 85 Fh: Horizontal Frequency (KHz) Fv: Vertical Frequency (Hz) 2.5 Safety protection The safety protection function protects the monitor. When the video signal frequency from the computer is out of range (refer to Product Specifications), the monitor will protect itself and a message will appear on the screen warning you to reset the monitor type on your computer. 3. Technical information 3.1 Products specifications Model Picture tube Size: Dot pitch: Surface / transmission: Maximum viewable area Display size (factory setting) (Adjustable) Synchronization range Horizontal frequency: Vertical frequency: Max. Resolution and C170 Pure Flat Screen CRT 17-inch (43.18 cm) diagonal 0.25 mm Tinted screen glass non-glare, black matrix, flat screen 16.02" (40.69 cm) diagonal 310 mm (H) x 232.5 mm (V) 12.20 inch (H) x 9.15 inch (V) 30-70 KHz 50-160 Hz 1280 x 1024 Recommended resolution 1024 x 768/85 Hz Dot Rate Power supply (universal) Input Voltage: Consumption: Input signal Display Analog Input Net Weight: Gross Weight: Unit dimension (W x H x D) Operating condition Temperature: Humidity: Storage condition Temperature: Humidity: DDC1/DDC2B 110 MHz AC 100-240V @ 60/50 Hz 75 watts maximum Video: Analog 0.7Vp-p / 75 Ohms Sync.: Separate sync. TTL level Unlimited number of colors (depends upon video card) 18.5 kg (40.7 lbs.) 21.0 kg (46.2 lbs.) 492 mm x 458 mm x 425 mm 19 inch x 18 inch x 17 inch 5°C~40°C (41°F to 104°F) 20% ~ 80% -20° ~ 60°C (-4°F to 140°F) 10% ~ 90% VESA standard NOTE: All technical specifications are subject to change without notice. Page 5 Page 6

  • 1
  • 2
  • 3
  • 4
  • 5
2.3 Self test pattern
The monitor may display a three-color test pattern. This indicates that the
monitor is functioning properly, but the computer’s video signal is not reaching
the monitor. In this case, please make sure the video cable is properly
connected. The test pattern will disappear when the monitor is receiving the
video signal. However, if the test pattern does not display all three colors (blue,
green and red), the monitor may not be functioning properly. Check the
www.insignia-products.com website or call customer support toll free at
1-877-467-4289.
2.4 Timing guide
This multi-scanning monitor can automatically detect and display several video
modes. If the monitor recognizes one of the preset timing signals, it will reset
that mode and any stored display adjustments you have made.
The factory preset modes are indicated in the following table:
F
h:
Horizontal Frequency (KHz)
F
v
: Vertical Frequency (Hz)
2.5 Safety protection
The safety protection function protects the monitor. When the video signal
frequency from the computer is out of range (refer to Product Specifications),
the monitor will protect itself and a message will appear on the screen warning
you to reset the monitor type on your computer.
3. Technical information
3.1
Products specifications
Model
C170 Pure Flat Screen CRT
Picture tube
Size:
Dot pitch:
Surface / transmission:
17-inch (43.18 cm) diagonal
0.25 mm
Tinted screen glass non-glare, black matrix,
flat screen
Maximum viewable area
16.02” (40.69 cm) diagonal
Display size (factory setting)
(Adjustable)
310 mm (H) x 232.5 mm (V)
12.20 inch (H) x 9.15 inch (V)
Synchronization range
Horizontal frequency:
Vertical frequency:
30-70 KHz
50-160 Hz
Max. Resolution and
1280 x 1024
Recommended resolution
1024 x 768/85 Hz
Dot Rate
110 MHz
Power supply (universal)
Input Voltage:
Consumption:
AC 100-240V @ 60/50 Hz
75 watts maximum
Input signal
Video: Analog 0.7Vp-p / 75 Ohms
Sync.: Separate sync. TTL level
Display Analog Input
Unlimited number of colors
(depends upon video card)
Net Weight:
Gross Weight:
18.5 kg (40.7 lbs.)
21.0 kg (46.2 lbs.)
Unit dimension (W x H x D)
492 mm x 458 mm x 425 mm
19 inch x 18 inch x 17 inch
Operating condition
Temperature:
Humidity:
5
°
C~40
°
C (41
°
F to 104
°
F)
20% ~ 80%
Storage condition
Temperature:
Humidity:
-20
°
~ 60
°
C (-4
°
F to 140
°
F)
10% ~ 90%
DDC1/DDC2B
VESA standard
NOTE:
All technical specifications are subject to change without notice.
Mode
Resolution
(dots
×
lines
)
F
h
.
F
v
.
Mode
Resolution
(dots
×
lines)
F
h
.
F
v
.
1
720
×
400
31.47
70
6
800
×
600
53.67
85
2
640
×
480
31.47
60
7
800
×
600
63.90
100
3
640
×
480
43.27
85
8
1024
×
768
48.36
60
4
800
×
600
37.88
60
9
1024
×
768
60.02
75
5
800
×
600
46.87
75
10
1024
×
768
68.67
85
Page 5
Page 6