Insignia D400 User Manual - Page 16

Insignia User Manual INSTALLING ADDITIONAL MEMORY Follow instructions on page 14 for removing the computer cover. . Open the securing clips at each end of the memory module connector. Insert the additional memory module in its correct alignment into the module connector until it snaps into position. The securing clips will automatically snap into place when the memory module is correctly inserted. Replace the computer cover, reattach all cables, and start your computer. INSTALLING A PCI EXPANSION CARD Follow instructions on page 14 for removing the computer cover. Remove the screw that holds the filler bracket in place for the card slot you want to use and save the screw. Align the gold connectors on the bottom of the card with the connector on the computer board. Rock the card back and forth while pressing it into place until it is seated. Secure the card to the chassis using the screw you removed earlier. Connect any cables that are attached to the card following manufacturer's recommendations in the instructions that came with the card. Replace the computer cover, reattach all cables, and start your computer. 15