Insignia I-LC23Q1 User Manual (English) - Page 37
Programming The Remote Control - codes
View all Insignia I-LC23Q1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter8 Advanced Settings 9 PROGRAMMING THE REMOTE CONTROL The TV device button has been preset to work with your LCD TV. You can program the remote control to work with as may as seven other devices (VCR, DVD player, satellite, etc). 9-1 Programming to Control Other Devices TO PROGRAM TO CONTROL OTHER DEVICES 1. Turn ON the device that you want to program the remote to control. 2. On the remote control, hold down the SETUP button and press the corresponding device button until the LED lights and stays on. 3. Enter the three-digit programming code for the device and manufacturer. For a list of device programming codes, see 9-2 Device Program Codes. If the code is accepted, the LED turns OFF. If the LED does not turn OFF, repeat steps 2 and 3 with the next code listed for the device and manufacturer. NOTE: Many devices have more than one code listed. For these, start with the first code, if that doesn't work, try the second and so on. Make sure that you try all the codes listed until you find the one that works for the device. 4. Point the remote control at the device and press POWER. The device should turn off. 9-2 Device Program Codes The following is a list of device codes to be used when manually programming your remote control. You may have to try several of the codes for each brand before finding a code that works with your device. 37 37