Insignia IN-CS102 User Manual (English) - Page 10

OPERATION RADIO OPERATION • SWITCHING TO RADIO MODE Press MOD button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency. • SELECTING THE FREQUENCY BAND At radio mode, press BND/LOU button (13) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM • SELECTING STATION Press MANU/SKIP button (17) or MANU/SKIP button (16) shortly to activate automatic seek function. Press for several seconds until "MANUAL" appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and "AUTO" appears on the display. threshold level of stop level, the radio is holding at that preset number for several seconds with release mute, then searches again. • STATION STORING Press any one of the preset buttons (14) (1 to 6) to select a station, which had been stored in the memory. Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button. • MONO/STEREO Press MON button (1) to select mono or stereo mode. You can sometimes improve reception of distant stations by selection mono operation. • LOCAL/DISTANT Press LOC button (2) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation. • AUTOMATIC MEMORY STORING & PROGRAM SCANNING - Automatic memory storing Press AS/PS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button. - Program scanning Press AS/PS button (18) shortly to scan preset station. When the field strength level is more than the 10