Insignia IS-CM100751 User Manual (English) - Page 11
Using Self Diagnosis
View all Insignia IS-CM100751 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
IS-CM100751_combined.fm Page 9 Tuesday, April 12, 2005 10:14 AM IS-CM100751 19-inch Color Monitor Icon Control T.Pin Corner B.Pin Corner Rotation Degauss Status Signal Level Recall Function Adjust the pin corner top when the top sides of the screen are bowed. Adjust the pin corner bottom when the bottom sides of the screen are bowed. Adjust the rotation when the screen is tilted left or right. Keep the monitor free from unwanted magnetism that can result in color impurity. Display horizontal and vertical frequency and polarity. Change the signal voltage if images run on the monitor. Video input signal voltage varies between video cards. The factory default is 0.7 V. Reset the screen to the factory settings. Color Test Display an RGB color bar to determine if the screen color is expressed normally. Using Self Diagnosis If the monitor does not display, press any key and the Self Diagnosis screen opens. Self Diagnosis checks the status of the monitor and determines whether there is a valid signal. NO SIGNAL The No Signal screen opens when the VGA connector is not connected to a computer or when the monitor is in DPMS mode. OUT OF RANGE HF: 30-95 KHz V: 50-160 Hz PC DISPLAY SETTINGS CORRECT? The Out of Range screen opens when the applied frequency is under or over the normal frequency range. Normal range H: 30-95 KHz V: 50-160 Hz www.Insignia-Products.com 9