Insignia NS-19E430A10 User Manual (English) - Page 14

NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV Making connections Connecting the power cord To connect the power cord: 1 Slide the AC power adapter holder into the holder mounting hole on the back of the TV. Adapter holder For NS-19E430A10 Connecting an antenna, cable TV, or satellite TV To connect an antenna, cable TV, or satellite TV: 1 Make sure that your TV is turned off and the power cord is disconnected. 2 Connect one end of a coaxial cable to the ANT/CABLE IN jack on the back of your TV, then connect the other end to the antenna, cable TV, or satellite TV jack. Back of TV For NS-22E430A10 Holder mounting hole 2 Place the AC power adapter into the holder. AC adapter Power cord 3 Insert the power cord into the AC adapter, then insert the AC power adapter into the DC IN 12V jack on the back of your TV. 4 Plug the power cord into a power outlet. Warning • If you wall mount your TV, make sure that you use the AC power adapter holder. • If you place your TV on a flat surface, such as a table, you do not have to use the AC power adapter holder. • When your TV is turned off, power is still flowing into it. To completely disconnect power, unplug the power cord. Antenna, cable TV, or satellite TV connection 3 Turn on your TV. 4 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select TV. Press OK/ENTER. Note You can also press TV on the remote control to select the TV. 10 www.insigniaproducts.com