Insignia NS-19E430A10 User Manual (English) - Page 9
Attaching a wall-mount bracket, Connecting the power cord, DC IN 12V - ac power
View all Insignia NS-19E430A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
19" 720p LED HDTV/ 22" 1080p LED HDTV Attaching a wall-mount bracket Warning These instructions are for use by qualified service personnel only. To reduce the risk of damage or injury, do not wall-mount your TV unless you are qualified to do so. To attach a wall-mount bracket: 1 If the stand is installed, remove the four screws that secure the stand to the TV, then remove the stand. 2 Secure the wall-mount bracket (not provided) to the back of your TV using the screws that secured the stand to your TV. These are M4*12 (4 mm diameter and 12 mm screw thread length) screws. 3.937" (100 mm) 2 Place the AC power adapter into the holder. AC adapter Power cord 3.937" (100 mm) Connecting the power cord To connect the power cord: 1 Slide the AC power adapter holder into the holder mounting hole on the back of the TV. Adapter holder For NS-19E430A10 For NS-22E430A10 Holder mounting hole 3 Insert the power cord into the AC adapter, then insert the AC power adapter into the DC IN 12V jack on the back of your TV. 4 Plug the power cord into a power outlet. Warning • If you wall mount your TV, make sure that you use the AC power adapter holder. • If you place your TV on a flat surface, such as a table, you do not have to use the AC power adapter holder. • When your TV is turned off, power is still flowing into it. To completely disconnect power, unplug the power cord. www.insigniaproducts.com 5