Insignia NS-1DRVCR User Manual (Spanish) - Page 12

Remote control batteries The remote control requires two AAA (RO3) batteries (not included). We recommend that you replace the batteries on a yearly basis or when the operation of the remote control becomes intermittent or unsatisfactory. Replace the original batteries with new AAA batteries. Do not mix old and new batteries or different types of batteries. To replace the batteries: 1 Press the lock tab of the battery holder and open the battery compartment. 2 Place two AAA batteries in the battery holder, matching the + and - in the battery compartment. 3 Close the battery holder. Caution • Use only the size and type of batteries specified. • Make sure that you follow the correct polarity as indicated in the battery compartment. Reversed batteries may damage the device. • Do not mix different types of batteries together (for example, Alkaline and Carbon-Zinc) or old batteries with new ones. • If the remote is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged. They can overheat and rupture. Using your recorder Turning your recorder on and off To turn your recorder on and off: 1 Plug the power cord into the back of the recorder and into an electrical outlet. 2 Press the POWER button to turn on your recorder. 3 Press the POWER button again to turn off your recorder. Initial Setup Wizard The first time you turn on the recorder, the Initial Setup Wizard opens so you can set the language and clock. To set up your recorder with the Setup Wizard: 1 Use / to select a language for the Setup menu and on-screen display, then press ENTER. 2 Enter the necessary information for year, date, and time. • / (left/right): Moves the cursor to the previous or next column. • / (up/down): Changes the setting at the current cursor position. 3 Press ENTER to confirm your setting. 4 Press ENTER to exit the menu. Note You can reset the Initial Setup Wizard from the Factory Set option in the setup menu (see "General Settings" on page 15). Playing a tape To play a tape: 1 Press VCR to switch control to the VCR deck. 2 Insert a pre-recorded video cassette. • If the recorder is turned off, it turns on automatically when the tape is loaded. • If the Timer indicator lights on the front panel display window, press POWER once. 3 Press PLAY ( ) to start playback. If a tape without a safety tab is inserted, the recorder starts playback automatically. 4 Press STOP ( ) to stop playback. If the tape reaches the end before you press STOP ( ) the recorder automatically stops, rewinds, then ejects the tape. Note S-VHS Quasi Playback (SQPB) • Your recorder can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes. VCR playback options Buttons EJECT ( ) PAUSE ( ) FORWARD ( ) BACKWARD ( ) CLEAR TRK ( +/ -) Operations Press to eject the tape in the VCR deck. Press to pause playback. Press repeatedly to step forward one frame at a time Note: After 5 minutes in STILL mode the recorder stops to protect the tape and video heads. Press to scan forward. In STOP mode, fast forwards the tape. In PAUSE mode, starts slow motion playback Note: After 3 minutes in SEARCH or SLOW MOTION mode the recorder returns to PLAY mode to protect the tape and video heads. Press to scan backward. In STOP mode, rewinds the tape. Note: After 3 minutes in SEARCH mode the recorder returns to PLAY mode to protect the tape and video heads. Press to reset the current tape counter to 0:00:00. To automatically go to tape counter position 0:00:00, press RETURN while the tape is in STOP mode. Press to manually reduce noise on the screen during tape playback. Tracking is set automatically when a tape is inserted. 12 www.insignia-products.com