Insignia NS-1DRVCR User Manual (Spanish) - Page 22

Tips • • • • • • The source signal must be DVC-SD format. Some camcorders cannot be controlled using this recorder's remote. If you connect a second recorder using a DV cable, you cannot control the second DVD from this one. You cannot control this unit remotely from a component connected to the DV IN jack. You cannot record date and time information from a DV cassette. Disconnecting the DV cable while recording a contents of the connected digital camcorder may result in malfunction. To record from a digital camcorder: 1 Make sure your digital camcorder is connected to the front panel DV IN jack. See "Recording from DV input" on page 21. 2 Make sure that the DV audio input is set correctly. You can choose between Audio 1 (original audio) and Audio 2 (overdubbed audio). • DV Input is set from the DV Record Audio in sub-menu of the Setup menu. See "Recording from DV input" on page 21 for more information. 3 Press INPUT repeatedly to select the DV input. 4 Find the place on the camcorder tape that you want to the recording to start from. For best results, pause playback at the point you want to start recording from. • Depending on your camcorder, you can use your recorder's remote to control the camcorder using STOP, PLAY, BACKWARD, FORWARD and PAUSE. 5 Press REC once to start recording. • Recording is automatically stopped if the recorder detects no signal. • You can pause or stop the recording by pressing PAUSE/STEP ( ) or STOP ( ). You cannot control the camcorder from this remote control during recording. • In Video mode, the final frame of the recording may remain displayed on screen for a while after recording stops. Troubleshooting If you cannot get a picture or audio through the DV IN jack, check the bullet points: • Make sure that the DV cable is correctly connected. • Try switching off the connected equipment then switching it back on. • Try switching the audio input. Note Depending on the connected camcorder, you may not be able to control it using the remote control supplied with your recorder. Editing recordings Title List and Chapter List menu overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, and whether you are editing original content or a playlist. There are two ways to edit VR mode DVD-RWs. You can directly edit the original content of the disc, or you can create and edit a playlist. The playlist does not actually change any of the content on the disc, but just controls how the content is played back. To use the Title List menu: 1 If the DVD is playing, press STOP ( ). 2 Press DISC MENU/LIST to open the TITLE LIST menu. Playback should be stopped when you do this. • When selecting titles, press the / buttons to display the previous/next page if there are more than six titles. • If you are editing a VR mode disc, press DISC MENU/LIST to switch between Original and Playlist menus. • On the left side of the screen are the menu options. The main part of the screen shows thumbnails of the titles (or chapters) on the DVD. You can change these thumbnails by pressing the THUMBNAIL button. (see "Changing title thumbnails" on page 23.) • Press DISPLAY to display the information about the selected title on the Title List menu. • After selecting a title or chapter on the Title List or Chapter List menu, press ENTER. The menu options are on the left side of the menu. Press the / buttons to select an option, then press ENTER to confirm your selection. 3 To exit the TITLE LIST menu, press RETURN ( ) repeatedly. 12 3 7 6 5 4 # Description Function 1 Currently The title that is currently selected is selected title highlighted 2 Thumbnail A thumbnail picture of the title 22 www.insignia-products.com