Insignia NS-22D510NA19 User Guide - Page 18

Insignia LED TV • If you select Cable from the wall or Antenna your TV starts scanning for channels and displays a progress screen. Note: You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list. 15 Press ENTER to close the wizard. If you selected: • Cable from the wall or Antenna, your TV tunes to the first channel it found in the scan. • Cable/Satellite box, press INPUT to open the INPUT SOURCE list, press  or  to select the video input (HDMI or AV) you connected the box to, then press ENTER. Your TV switches to the input you selected. Understanding the basics This section covers basic information for: • Turning your TV on or off • Selecting the video input source • On-screen menu overview • Navigating the menus • Selecting a channel • Adjusting the volume • Viewing channel information Turning your TV on or off 1 Make sure that the power cord is connected to a power outlet. 2 Press (power) to turn on your TV. The power indicator turns off. 3 Press (power) again to turn off your TV. Your TV enters standby mode, and the power indicator turns red. WARNING: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode. 18 www.insigniaproducts.com