Insignia NS-24E40SNA14 User Manual (English) - Page 17
Using DVI (same as HDMI but requires an audio connection)
View all Insignia NS-24E40SNA14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Insignia 24" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI1/DVI jack to connect a cable or satellite box. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV HDMI cable 3.5mm audio connector cable connector Cable or satellite box HDMI cable with HDMI-DVI adapter Side of TV HDMI1/DVI PC/DVI jack AUDIO IN jack 3.5mm audio cable Back of TV To connect a cable or satellite box using DVI: 1 Make sure that your TV's AC power adapter is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI1/DVI jack on the side of your TV. 5 Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press S or T to highlight HDMI 1, then press ENTER. www.insigniaproducts.com 13