Insignia NS-24E40SNA14 User Manual (English) - Page 20
Using coaxial (good), To connect a cable or satellite box using coaxial, ANT/CABLE IN, INPUT, ENTER
View all Insignia NS-24E40SNA14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using coaxial (good) On your TV NS-24E40SNA14 Insignia 24" LED TV Cable or satellite box Coaxial cable connector ANT/CABLE IN jack Coaxial cable Back of TV To connect a cable or satellite box using coaxial: 1 Make sure that your TV's AC power adapter is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the coaxial out jack on the cable or satellite box. 4 Plug your TV's AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to select TV, then press ENTER. 7 If you cannot tune to channels you know exist, scan for channels. See "Automatically scanning for channels" on page 45. Notes • Use a coaxial cable to eliminate interference and noise from radio waves. • Do not bundle the coaxial cable with the AC power adapter or other cables. 16 www.insigniaproducts.com