Insignia NS-32E740A12 Important Information (English) - Page 8

NS-32E740A12 Problem Solution After Auto Channel Search, there are no channels One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons do not work TV keeps turning off • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. • Make sure that the channels are not blocked. See "Setting parental control levels." • Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" in the online User Guide. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure you have the correct input selected to view channels from the cable or satellite box. • If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" in the online User Guide. • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" in the online User Guide. • If a setting is grayed, the setting is not available in the current video input mode. • When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. • Make sure that the Button Lock option is set to Off. See "Locking control buttons" in the online User Guide. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. • Make sure that the sleep timer is not turned on. See "Setting the sleep timer" in the online User Guide. Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Maintaining • Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you. • Storage temperatures are 32° to 122°F (0° to 50°C). • Working temperatures are 41° to 104°F (5° to 40°C). • Do not place your TV in direct sunlight or near a heat source. Cleaning the TV cabinet Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the screen or cabinet with the cloth. Use a clean cloth to dry the screen or cabinet. Cleaning the TV screen Clean the screen with a soft, lint-free cloth. Specifications Specifications are subject to change without notice. Warranty Parts: 2 years Dimensions and weight Labor: 2 years Screen Without stand With stand 29.93 × 18.82 × 1.57 in. (76.02 × 47.8 × 3.99 cm) 18.3 lbs. (8.3 kg) 29.93 × 21.11 × 8.01 in. (76.02 × 53.62 × 20.4 cm) 21.83 lbs. (9.9 kg) Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution 31.5" LED-LCD 60Hz 720p Panel resolution Aspect ratio Contrast ratio (typical)-panel 1366 (H) × 768 (V) 16:9 1200 : 1 Dynamic contrast ratio- (typical) list value Brightness (center typical) cd/m2-panel Comb filter 5000 : 1 350 3d y/c digital Response time 9ms Horizontal viewing angle 178 (typical) Vertical viewing angle 178 (typical) Display resolutions/VGA scan rates HDMI Suggested resolutions Component video Suggested resolutions PC/VGA Suggested scan rates: Tuner 1080p, 1080i, 720p, 480p, 480i 1080i, 720p, 480p, 480i 720 × 400/70Hz, 640 × 480/60Hz, 640 × 480/72Hz, 640 × 480/75Hz, 800 × 600/56Hz, 800 × 600/60Hz, 800 × 600/75Hz, 1024 × 768/60Hz, 1024 × 768/70Hz, 1024 × 768/75Hz, 1280 × 768/60Hz, 1360 × 768/60Hz Analog Digital NTSC ATSC, 8-VSB, Clear-QAM 6 www.insigniaproducts.com