Insignia NS-32LCD User Manual (English) - Page 8

Connecting speakers To connect speakers to your TV: 1 Unplug the TV power cord and all devices connected to your TV. 2 Connect the speakers to the speaker jacks on the back of your TV. Make sure that you connect the black part of the speaker wire to the - jack and the red part of the speaker wire to the + jack. Insignia NS-32LCD 32" LCD TV Use the following illustration to connect an outside antenna: VHF/UHF antenna Combination antenna OR VHF/UHF antenna 300 ohm cable with adapter 75 ohm cable Antenna cable Combiner UHF antenna Separate antennas VHF antenna OUT IN OR Red Black Black Red Note The location of the speaker jacks on your TV may vary from the illustration. Connecting an outside antenna Antenna cables come in two types: 75 ohm and 300 ohm. 75 ohm cable 300 ohm cable Connecting cable TV Your TV has a 75 ohm jack for connecting cable TV. Some cable TV providers scramble the signals for "premium" (pay) channels. To view these channels, you need a converter/descrambler box. If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descramble box, contact your cable TV provider. To connect cable TV without a converter/descrambler box: 1 Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV. 2 Connect the other end of the cable to the cable TV wall outlet. • If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV. • If your antenna cable has a 300 ohm connector, connect the cable to a 300-75 ohm adapter (not included), connect the adapter to a 75 ohm cable, then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV. 8 www.insignia-products.com