Insignia NS-37L760A12 User Manual (English) - Page 17
Using composite video good, Using coaxial good, Insignia 37 LCD, 60Hz 1080p
View all Insignia NS-37L760A12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Insignia 37" LCD, 60Hz 1080p Using composite video (good) To connect a cable or satellite box using composite video: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box. 3 Connect an A/V cable (not included) to the Y-VIDEO and L/R (audio in) jacks on the side of your TV and to the composite video and audio out jacks on the cable or satellite box. Cable or satellite box Cables are often color-coded to match color-coded jacks. Note: The yellow connector on the AV cable plugs into the green Y-VIDEO jack. Using coaxial (good) To connect a cable or satellite box using coaxial: 1 Make sure that your TV's power cord is unplugged, and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not included) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack on the cable or satellite box. Cable or satellite box A/V cable Side of TV 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 21. Back of TV Coaxial cable 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Go through the Setup Wizard on page 21. Notes • • Use a coaxial cable to eliminate interference and noise from radio waves. Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 13