Insignia NS-42D40SNA14 User Manual (English) - Page 20

Using composite video (good), On your TV

Page 20 highlights

NS-42D40SNA14 Insignia 42" LED TV Using composite video (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green Y/VIDEO jack. On your TV Cable or satellite box Composite video cable connector Analog audio cable connectors AV cable (composite video cable) Composite Analog video jack audio jacks Back of TV 1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the Y/VIDEO jack and AUDIO L and R jacks on the back of your TV and to the AV (composite video) and audio out jacks on the cable or satellite box. Notes • The Y/VIDEO, PB, and PR video jacks (used to connect a component device) share the AUDIO L and R jacks with the Y/VIDEO jack (used to connect a composite device). • When you connect the audio using the AUDIO L and R jacks, the audio output is analog. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight Component/AV, then press ENTER. 16 www.insigniaproducts.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

16
NS-42D40SNA14 Insignia 42" LED TV
www.insigniaproducts.com
Using composite video (good)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an AV cable (not provided) to the
Y/VIDEO
jack and
AUDIO L
and
R
jacks on the back of your TV and to
the AV (composite video) and audio out jacks on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
or
to highlight
Component/AV
, then press
ENTER
.
Notes
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
Y/VIDEO
jack.
Notes
The
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to connect a component
device) share the
AUDIO
L
and
R
jacks with the
Y/VIDEO
jack (used to
connect a composite device).
When you connect the audio using the
AUDIO
L
and
R
jacks, the audio
output is analog.
Cable or
satellite box
AV cable (composite video cable)
Back of TV
Composite
video cable
connector
Composite
video jack
Analog audio
cable
connectors
Analog
audio jacks
On your TV