Insignia NS-42D40SNA14 User Manual (English) - Page 24
Using DVI (same as HDMI but requires an audio connection), Side of TV
View all Insignia NS-42D40SNA14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NS-42D40SNA14 Insignia 42" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 2/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV Side of TV DVD or Blu-ray player HDMI cable connector 3.5mm RCA stereo audio cable connector HDMI cable with HDMI-DVI adapter HDMI 2/DVI PC AUDIO IN jack jack 3.5mm RCA stereo audio cable Back of TV 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the DVD or Blu-ray player. 3 Connect the other end of the cable to the HDMI 2/DVI jack on the side of your TV. 4 Connect a 3.5mm RCA stereo audio cable (not provided) to the PC AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks on the DVD or Blu-ray player. Note When you connect the audio using the PC AUDIO IN jack, the audio output is analog. 5 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 6 Press INPUT to open the INPUT SOURCE list. 7 Press S or T to select HDMI2, then press ENTER. 20 www.insigniaproducts.com